Growth in plant retrofit market a good sign for manufacturing

In launching its new Plant Design Suite 2012, Autodesk hopes to be able to tie all the parts of plant retrofit together from design stage to modeling to operation.

09/22/2011


Part of the drive behind the new software launch is a growth in the plant retrofit market, as manufacturers begin to look for efficient ways to modernize and improve operations. Mark Strassman, VP of Plant and Construction, Autodesk, discussed the trend with CFE Media and how their product fits into this growing market:

CFE Media: What’s the retrofit market like right now for manufacturing? Do you see a lot of investment in infrastructure improvements in plants? And have those projects been more on the discrete or process side?

Strassman: Autodesk continues to see a significant amount of investment and work focused on the retrofit and revamp of existing process plants. This is especially so in the developed countries where: population growth and increased urbanization are driving greater demand for output, existing industrial process plants are aging and requiring upgrades, and the regulatory climate is becoming stricter with respect to environmental and safety standards.

CFE: Why does a plant design product make sense for facilities today?

Strassman: The Autodesk Plant Design suite offers a multi-discipline solution for designing and retrofitting facilities. It is particularly relevant in the market today where engineering and design efficiency is critical. There are large costs incurred when plants are offline and not producing at full capacity during a retrofit/revamp project. Increasingly these projects are “fast-tracked”, requiring multiple project tasks to be done in parallel with tight timelines. In this environment, it is essential that projects get done on time, on budget, and with minimal errors/rework. This can only be accomplished successfully with good collaboration and coordination. Moreover, for a low-cost, in-house engineers can collaborate more effectively with design teams to ensure the owner/operator input is reviewed early in the design cycle. With everyone using the same software, projects are easier to coordinate.

CFE: What’s the role of the plant manager or facilities manager in this kind of project? How does plant design software help leverage their knowledge on a retrofit project?

Strassman: Often, nobody knows an existing plant as well as the plant or facilities manager, and during a retrofit/revamp project, their working knowledge of the facility is important to project success. Autodesk Navisworks is the ideal tool for plant managers to review a retrofit/revamp project. With this tool, they can conduct a thorough, whole-project design review by walking through 3D models, simulating construction, and visualizing changes to the plant. They can then provide feedback, based on their knowledge, by marking up any errors or issues they see. It is a powerful and easy to use tool for owner/operators (and especially plant managers) to review the work of their engineering firms.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me