Gripping parts
Problem: You need the gripping force of locking pliers, but don't want to mark or damage the part being held. Solution: Line the jaws of the pliers with several layers of medium grit emery cloth before clamping down.
Problem: You need the gripping force of locking pliers, but don't want to mark or damage the part being held.
Solution: Line the jaws of the pliers with several layers of medium grit emery cloth before clamping down. Enough friction is obtained to secure the part without leaving deep marks.
Contributor: John P. Dina II, Maintenance Coach, AlliedSignal, Inc., Clearfield, UT
Each item published in "Simple Solutions" will earn the sender $35. Send your tips to:Simple SolutionsPlant Engineering magazine2000 Clearwater Dr.Oakbrook, IL 60523-8809E-mail: gweidner@cahners.comFax: 630-320-7145
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Supplements
- Salary Survey
- Blogs
- Digital Reports
- Survey Prize Winners
- CFE Edu
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey