Green reality: “Regulations won’t stop until the wooly mammoth returns”

IDC, the Framingham, Mass.-based research firm, was pleasantly surprised in a survey of 372 U.S. companies to find that the vast majority—72 percent—stated that green/sustainability issues were important to senior management.  Much of the interest, however, is being driven by regulations—a key factor in doing business. As one survey respondent put it: “Regulations won’t stop until the wooly mammoth returns.”

01/23/2009


IDC , the Framingham, Mass.-based research firm, was pleasantly surprised in a survey of 372 U.S. companies to find that the vast majority—72 percent—stated that green/sustainability issues were important to senior management.
Much of the interest, however, is being driven by regulations—a key factor in doing business. As one survey respondent put it: “Regulations won’t stop until the wooly mammoth returns.”
Says Jill Feblowitz, IDC practice director for business technology, “We were quite surprised at the positive response and the number of initiatives going on. Internal recycling was very popular in all segments, followed by energy efficiency—an indication that all sectors are looking to reduce their carbon footprint, but also the cost of operations.”
The survey asked respondents the importance of green/sustainability to top management; to identify what initiatives were under way, their motivation; and the challenges encountered. They also were asked what role IT was slated to play.
Manufacturers comprised 60 percent of the respondent companies, which also included oil & gas, utilities, and retail firms—all with 1,000 employees or more. The findings were discussed in a December Webinar featuring a panel of IDC industry analysts.
For manufacturers, “It’s all about regulations today, and what they’re going to be in the future,” says Kimberly Knickle, IDC practice director for manufacturing. “They’re very convinced that there will be more regulations in the future.”
Manufacturers listed energy efficiency, reusable materials, improving transportation and distribution, and reducing greenhouse emissions as their top initiatives. “The one we see increasing the most over the next few years is using renewal energy,” says Knickle. “Today it is hard to buy from a renewal source, but it will get easier over time.”
Looking at ROI for such initiatives, Knickle claims the results are mixed. “Some were willing to look out three or more years for a payback, and 11.6 percent were willing to expect no payback, or had no payback metrics,” she says.
A sizeable majority of manufacturers—73 percent—said IT would play a role in improving their green/sustainability profiles. This was somewhat countermanded by the fact that slightly more than 22 percent indicated that IT will be increased. Meanwhile, 43 percent of manufacturers stated they would buy new applications to assist them. This is in comparison to 60 percent of respondents in the utility sector, who say they are going to invest in more software.
“The hidden challenge for manufacturers is how they will make their processes greener,” Knickle says.
In addition to software playing a prominent part, IT consulting services also were listed as a prime factor for enabling green initiatives. Some engagements will include involvement with suppliers and partners, as companies are beginning to realize they are dependent on others to help meet their goals.
Best practice recommendations for all respondents include:
• Use cross-functional teams and core sponsors.
• Funding will be tight, given the economy, so priorities are critical.
• Work closely with IT suppliers and professional service providers that may have best-practice guidelines in key focus areas.
• Participate in industry efforts and standards initiatives.
Recommendations for vendors include:
• Know what functionality and data you already have that supports green business.
• Listen to customers to better partner with them.
• Take advantage of existing customer councils to raise the topic and know what to change first.
• Talk green, but make it about business.
Related links:
Material yield: SYSPRO ERP continues to drive ”green” rewards
Lean to Green: Free technology helps Ohio manufacturers make jump to renewable energy industry





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me