Grasp control, and find the power to change

Every manufacturer has the same goal of creating a productive plant – and each faces the same hurdles to achieve it.

12/16/2011


Bob Vavra, Content Manager, Plant EngineeringIf it’s true that you can only manage what you can measure, it must also be true that you can only change what you can control. Measurement is finite; it is length and width, time and distance, heat and speed. Control is a much more abstract concept. Change is more difficult because control is more elusive. Yet the ability to grasp full control of your operation gives you the power to change.

So much of what happens in a modern manufacturing plant is absolutely controllable. Yet so much of the time spent discussing the various issues facing American manufacturing are based on things we just cannot control on a daily basis. Trade laws, energy prices, and Mother Nature are outside of your control. You cannot affect political discourse, global monetary policy, or whether your top supplier has had a disruption in service because of any of the above issues.

If you cannot control any of this, the good news is that they are also outside the control of your competitors.

So what’s left? Everything within the four walls of your plant. Everything that happens there, from energy consumption to maintenance strategy, from worker morale to worker safety, is all your responsibility, and it can all be changed. If you have control, congratulations–I’ll welcome your Top Plant nomination next year. And if there are still elusive areas where control has slipped away, this is a good time to get a firmer grasp on the rudder.

Gaining control is not a singular effort by a single plant manager, however. You have to gain the support of your staff and your top management. It’s nearly impossible to improve maintenance, for example, without the commitment of the line workers and the understanding of the front office about how such an effort will save money and improve productivity. The same equations of measurement and management and control and change apply in every department of your organization. The metrics may be different, but everyone is bound by the same basic laws.

And your competitors, whether in Boston, Berlin, Bangalore, or Bahrain, all face the same struggles. Their national rules on safety are different. Their tax structures may be more or less favorable. Their logistics, supply chains, and energy systems are all affected by terrain, transportation sophistication, and capital investment. Inside the four walls of these plants, however, it’s a very similar world. Every manufacturer has the same goal of creating a productive plant–and each faces the same hurdles to achieve it.

You, of course, have a slight edge in achieving these goals. You’re holding it.

This month we shared how one manufacturer grasped control of the manufacturing operation and grew it in the middle of a historic recession. Perhaps the most important part of NACCO Materials Handling Group’s recognition as the 2011 Top Plant recipient is that they seized control of their operation and changed it to meet the needs of their internal and external customers.

NACCO, a manufacturer of lift trucks, increased staff by 40% to fill needs in their growing business, and at the same time increased training for employees. New employees now receive 80 hours of training before being put into production. If you multiply that training by more than 200 new employees, you can see the commitment to training, and to people.

In your efforts to identify areas that need improvement, perhaps the most important point to be made is about people. People should not be controlled; they should be managed. Operational control is about making sure the parameters of your plant are understood. Management is about empowering the people to work effectively within those parameters. That includes, as NACCO showed us this month, giving them the training needed to get individually better at their jobs. This contributes to the entire operation getting better.

Improvement is change. Bettering your manufacturing plant each day, week, and month points you on the path to greater productivity, and greater operational excellence.

I believe it creates one greater benefit as well. When you control what happens inside the four walls of your operation by managing your processes and people effectively, you make all of those issues outside of your four walls irrelevant. That kind of control leads not just to change, but to success.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me