Grainger CEO: Productivity improvement a critical issue

More than 5,000 customers, 2,200 suppliers attend 2012 Grainger Show

02/27/2012


Grainger president and CEO Jim Ryan kicked off the 2012 Grainger Show in Orlando by pointing to productivity and workforce development as the two major challenges facing the myriad businesses Grainger serves across the U.S.

“Anything that has productivity attached to it, we’re seeing companies investing in it,” Ryan told more than 5,000 customers and 2,200 suppliers from around the country who gathered in Orlando for the annual event.

On the workforce front, Grainer is continuing its relationship with the American Association of Community Colleges by committing $400,000 to support 200 scholarships for students pursuing careers in the industrial trades. The scholarships are available at 100 community colleges across the country. This commitment brings the company’s total investment in technical education to nearly $2 million since 2006.

In a wide-ranging press conference after his keynote presentation, Ryan said the focus on productivity improvement has become an outflow of the economic recession. “When companies are down 5%, 10% they know how to take costs out. When it’s 30%, 40% 50%, it causes fundament changes in your business. More companies are paying attention.

“It’s caused a permanent change in buying behavior,” Ryan added.

Ryan called the workforce development issue, “a big issue not just for our customers but for the U.S. economy as well.” Citing a recent report that 600,000 skilled manufacturing are unfilled despite an 8.3% unemployment rate, Ryan said the company’s interest in the issue continues to increase.

“There are great jobs going unfulfilled. We need to shed more light on this issue,” he said. “Finding a way to resolve it is critical to the recovery of U.S. manufacturing. Businesses aren’t going to stand around and wait.”

On a number of other topics:

Sustainability: Ryan said new warehouse facilities in California and Illinois will be LEED Certified, but that the certification is secondary to the business value of sustainable facilities. That’s a point they make to their customers, and one their customers are demanding more and more. “It’s a business investment that also happens to be the right thing to do,” he said.

Global expansion: Grainger has purchased suppliers outside the U.S., and about 25% of Grainger’s business is now outside the U.S., a figure Ryan expects to keep growing. “Outside of the developed economies, there are not many broad-based suppliers. It’s increasingly difficult to be a single-country supplier in this business.”

As global manufacturing grows, Ryan thinks Grainger will continue to look at acquisition – although don’t necessarily expect to see the Grainger name used after these acquisitions. “Regardless of where you go in the world, this is a local business.” 

Six key trends:

Grainger president and CEO Jim Ryan cited six key trends in the global manufacturing economy:

  • A still uncertain economy
  • Increased foreign competition
  • A global war on talent
  • Big investments returning to the industry
  • Business productivity is increasing
  • Improved MRO productivity through supplier consolidation


Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me