Government in the power business

Pleas came from manufacturers and developers in the U.S. wind power industry requesting that the U.S. Government extend the PTC.

07/09/2012


As an analyst covering the global generators market for IMS Research, recently acquired by IHS  Inc., I recently had the privilege to attend Wind Power 2012 in Atlanta, Ga., and Power-Gen Europe 2012 in Cologne, Germany. While both conferences were well attended and very educational, it was clear that the prevailing theme at each event was the power that government policy makers have over the power generation industry.  

At Wind Power 2012 the pleas came from manufacturers and developers in the US wind power industry requesting that the U.S. Government extend the PTC (Production Tax Credit). The PTC is a federal renewable electricity production tax credit that gives wind power producers a $0.022/kWh tax credit for electricity generated by qualified energy resources and is set to expire on December 31, 2012.

The PTC has been around since 1992 but has expired and been renewed several times in between, creating boom or bust cycles within the wind industry. Each time the PTC was allowed to expire, the following year showed at least a 75% drop in wind capacity installations according to the American Wind Energy Association. The uncertainty created by whether the PTC will be renewed is already affecting turbine component orders for wind generators and converters, for the second half of 2012 with 2013 orders being almost non-existent in the U.S. market. Many manufactures have started layoffs and some estimate that as many as 40,000 US jobs in the industry could be lost.

Whether you agree with energy subsidies or not, globally they are here to stay for the foreseeable future, with fossil fuel subsidies still receiving the lion’s share of government funding. It appears to me that the main issues are caused by the market uncertainty created by the on-again, off-again way the US government goes about its business. If the U.S. truly wants to hit their targets for renewable power, a clear long term plan to get there needs to be put in place.

At Power-Gen Europe 2012 the conference had a similar feel due to the controversial policy to rapidly phase out nuclear power in Germany. After the 2011 tsunami and subsequent nuclear disaster at the Fukushima Daiichi nuclear power plant in Japan, Germany shut down eight of their older nuclear power plants and swiftly put a plan in place to close the remaining nine by 2022.

During a Plenary Session titled “German Power Policy – Solution or Illusion”, a panel of power industry experts shared their views and concerns about the German power policy. Some on the panel considered the decision by Chancellor Angela Merkel to close down so many nuclear plants so quickly a “knee jerk” reaction. While most agreed that moving toward renewable power was good for the future of Germany, there was also talk about the lack of leadership and vision from the plan that government policy makers had laid out.

The plan is to phase out all nuclear power over the next decade and increase its share of power from renewable sources from 20% to 35% by 2020 and 50% by 2030. The size of this undertaking is enormous, and the current Eurozone economic crisis isn’t going to help matters. Not to mention the substantial amount of investment needed to pull it off will have to come from somewhere.

Offshore wind power off the coast of the North Sea will have to play a key role in reaching that goal. One of the major hurdles discussed in the session was the required improvement of Germany’s power grid to get the power from the North, down to the more densely populated South. The final destination has been set by the German government, but the road will have to be paved by the sweat and hard work of the German power industry.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me