Good news is hard to find: Manufacturing reports show weakness

The March and April reports on manufacturing showed in charts and graphs what most manufacturing professionals already knew.

05/15/2008


The March and April reports on manufacturing showed in charts and graphs what most manufacturing professionals already knew. The manufacturing sector is continuing to have both its output and outlook battered by struggles with energy and economic issues.

April’s report from PricewaterhouseCoopers showed dwindling optimism in the consultancy’s quarterly Manufacturing Barometer. Only 12% of senior executives were optimistic about the U.S. economy over the next year. That’s a drop from 57% just one year ago, and from 29% just last quarter.

“We knew industrial manufacturers were feeling the pressures of the economic downturn; however, the reality of the situation really hit us when we saw this quarter’s findings,” said Barry Misthal, partner and industrial manufacturing sector leader at PricewaterhouseCoopers. “We expect confidence will remain low for much of 2008, but we are hopeful that the sector will begin to look up as 2009 approaches.”

More than two-thirds of executives cited oil and energy prices as a potential barrier to growth over the next 12 months.

Other key sources of anxiety cited include lack of demand (62%), the monetary exchange rate (57%) and decreasing profitability (48%).

The one bit of brighter news was that the weaker dollar offered opportunities for industrial manufacturers on a global basis. For full details of the report, go to www.pwc.com/manufacturing.

They also tried to find some good news in the quarterly Manufacturing Alliance/MAPI report of manufacturing, but there wasn’t a lot to find.

The composite index dropped almost 13% in March, from 64 to 57, matching the double-digit losses found in many of the sectors that make up the report. While any score above 50 indicates an increase in the next two quarters, the drop put the index at its lowest level since December 2006.

The U.S. investment index, which asks about capital investments, dropped from 74% to 62% in March, while the order backlog index fell from 67% to 55%. The shipments index also dropped by 12 percentage points, from 74% in December to 62% in March.

MAPI analysts said the drop in inventory indicates manufacturers are “reining in inventory growth.”

More details of the study can be found at www.mapi.net .



No good numbers

12% Percentage of manufacturing executives optimistic about the U.S economy’s future.

68% Percentage of executives who feel energy costs are their biggest barrier to growth

13% Decline in Manufacturing Alliance/MAPI index of manufacturing confidence. The index fell from 64 to 57, its lowest level in two years.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me