Global growth a compelling option for manufacturing

McGladrey partner Karen Kurek looks at the potential for growth—and the potential for growth to slow down

02/28/2013


Karen Kurek, McGladrey’s national manufacturing and distribution practice leader, talks with Plant Engineering about how American manufacturing growth is poised in early 2013: 

PE: With some of the federal issues resolved for the moment, how would you evaluate the growth potential for the U.S. manufacturing sector? 

Kurek: According to participants in our recent McGladrey Monitor Update survey, conducted at the end of 2012, Capitol Hill’s efforts to avoid the so-called fiscal cliff significantly dampened optimism among business leaders heading into 2013 — and may yet damage corporate performance through the first half of the year.

While most executives expect some upward movement in key metrics such as net revenue and domestic sales, the percentage of executives expecting increases – and the size of their projected increases – across all key performance indicators tracked by the survey are down significantly.

For example, while in the spring of 2012, 67% of respondents reported that they expected to add employees, that figure dropped to 41% by the end of the year. Correspondingly, the percentage of those expecting a decrease in workforce rose significantly, from 11% in the spring to 21% at the end of the year. The drop in expected workforce increases is particularly concerning as the manufacturing sector has been a key contributor to the increase in employment across the U.S. over the past 18 months. This anticipated decrease in employment may have a pervasive negative impact on the overall economy in the coming months.

After respondents predicted an average increase in net income of 13.1% in the spring, the end-of-year projection dropped to an average of +1.3%. And the average projected change in U.S. sales fell from +8% in the spring 2012 to +2.5% at the end of the year.

Needless to say, middle-market manufacturers and distributors are approaching 2013 cautiously after a rough end to 2012. These companies remain vulnerable to the volatility and uncertainty that have come to define the post-recession marketplace. While it is still possible that last year’s impasse will have a negative impact through the beginning of the year, the American Taxpayer Relief Act of 2012 enacted in early January — specifically the R&D tax credit renewal — may help restore confidence and spur investment in innovation. 

PE: How much of that growth is determined in the U.S., and how much is a matter of global manufacturing and economic issues? How would you assess the global health of manufacturing? 

Kurek: The argument for going global remains compelling: Even in 2009, during the deepest point of the recession, our survey data indicated that internationally active companies tended to be less affected by the recession than domestic-only companies, showing fewer revenue declines and higher margins.

That said, non-U.S. sales are not expected to grow nearly as well as U.S. sales in the coming year. According to our year-end survey, the average projected change in non-U.S. sales also fell from +7.2% in the spring to +5.7% at year’s end. Some industry sectors — such as automotive and transportation, or industrial and commercial machinery — are expecting a slowdown in international sales growth, due at least in part to the economic situation in Europe.

But in any economic environment, executives at thriving businesses keep an eye on their own businesses. For these companies, targeting new business acquisitions and new markets are factors in their continued success. This means working on an international level. In our survey, the percentage of revenues attributable to products and services sold to customers outside the United States is small — representing a median of only 5% of the revenues of companies we surveyed. This means there could be a significant number of opportunities that are not being leveraged. 

PE: What factors outside of government will continue to affect manufacturing in 2013? 

Kurek: Not all executives blame the fiscal cliff for their woes. Many identify more conventional business factors restricting their organizations: limited capital to develop new products and grow revenues; challenges in finding qualified employees; excessive government regulations; emerging foreign competition; and volatile material and component prices.

Interestingly, executives at thriving companies are less likely to blame government or political factors for their performances, focusing instead managing for change and improvement regardless of external factors.

These executives note that their successes were achieved through a variety of initiatives, including investing in continuous improvement efforts; implementing new information technology applications and systems; diversifying product lines; opening up fresh markets and distribution channels; making new acquisitions; and securing inventory with the help of increased credit lines.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me