Global concerns: Privately held manufacturers fret over rising energy, materials costs

Rising raw materials and energy prices have become major concerns for privately held manufacturing companies, according to a recent survey from Grant Thornton International. Globally, 61 percent of surveyed businesses reported being most concerned about raw materials costs, while 45 percent listed energy costs as their greatest concern.

12/03/2007


Rising raw materials and energy prices have become major concerns for privately held manufacturing companies, according to a recent survey from Grant Thornton International .
Globally, 61 percent of surveyed businesses reported being most concerned about raw materials costs, while 45 percent listed energy costs as their greatest concern.
These numbers emerged from the 2007 Grant Thornton International Business Report , which canvassed more than 7,200 privately held businesses in 32 countries. Grant Thornton, a U.K.-based umbrella organization for a global set of independent consulting firms, began surveying European small and medium-size businesses in 1992. The survey became a global effort in 2003, and companies surveyed are now primarily medium-size and large privately held manufacturers.
In this year’s survey, Turkish manufacturing businesses expressed the greatest concern about the direction of energy costs over the next 12 months, with 82 percent of respondents expecting them to have a major impact on production costs. Even in Mexico, an oil-producing country, 61 percent of manufacturers cited energy costs as a concern. Australia and Brazil, also energy-producing countries, are least concerned about energy costs. Just 20 percent of Australian manufacturers expect energy costs to have a major impact on costs, while 23 percent of Brazilian companies expressed such concern.
Says Alex MacBeath, Grant Thornton’s global head of privately held business services, "The management of energy consumption is critical to tackling global warming. When we asked manufacturers what they were doing, almost two-thirds reported taking measures to reduce
In addition to their concerns about rising energy and materials costs, survey respondents had strong—and sometimes surprising—opinions about globalization.
Manufacturers in Thailand, Australia, and New Zealand see globalization as a threat rather than an opportunity. This indicates increasing concerns about greater competition from Asian manufacturers, according to Robert Quant, partner at Grant Thornton Australia.
Unsurprisingly, Asian manufacturers are among the most positive in regard to globalization.Chinese manufacturers regard globalization as more of a threat, he says.
"Rapid growth in China is proving both a blessing and curse for business in Australia and New Zealand," Quant adds. "Increased demand has led to higher production in the Australian resources sector, fuelling the mining boom and strong economic growth. However, Australian manufacturers are having difficulties competing with China's ability to produce low-cost goods and are being constrained by shortages in skilled labor and the lowest unemployment levels in decades."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me