Getting the right data helps company decide to exhibit

Frontier Technology Inc. (FTI) is a company well-known in the federal government for being able to assist its customers in making data-driven decisions. In an era of the Industrial Internet of Things (IIoT), FTI's skill set seemed like a great match for the manufacturing sector.

03/09/2016


Frontier Technology Inc. Director of Data Analytics Michael Weatherly called Hannover Messe 2016 “a great opportunity” for the company to expand globally and into new manufacturing markets. Image: Courtesy FTIFrontier Technology Inc. (FTI) is a company well-known in the federal government for being able to assist its customers in making data-driven decisions. In an era of the Industrial Internet of Things (IIoT), FTI's skill set seemed like a great match for the manufacturing sector.

The U.S. Commercial Service approached FTI officials about exhibiting at Hannover Messe April 25-29 in Germany as part of the Partner Country USA pavilion, and the potential was clear. "We have a lot of Internet of Things technologies around predictive analytics," said Michael Weatherly, PhD, direct of data analytics for FTI.

"Energy is a really interesting market for us. We do a lot with training, and we have some really unique and innovative products." FTI was looking to expand its business beyond the work it has done with the Department of Defense and other agencies. The play into the IIoT was clear, and incentive packages from the state of Virginia, where one of FTI's six U.S. offices are located, and from the Commercial Service, will give the company its first entry into Hannover Messe.

The message around data

An employee-owned business based in Santa Barbara, Calif., FTI provides information and research methodology for complex system analysis. Its Operational Decisions Solutions tool helps transform data into actionable information and point users toward solutions.

Weatherly said the data-management lessons it has learned over the years translates very well to a global audience that's learning more about IIoT and its European parallel strategy, Industrie 4.0.

"We are swimming in data, but what are we doing with it?" Weatherly said. "We've got tons of information, and we're trying to get to the data that makes sense. The big trick is not just telling where we are and where we've been, but also getting into the predictive side through data.

"A lot of time you're only as good as the data you get," he added. "We're trying to help customers determine the failure of a system before it fails."

The move to Hannover gives FTI exposure to discuss how its data-management offerings play on a global basis. The chance to get in front of some of the world's top manufacturers is an exciting one for Weatherly and his team. "We're really looking forward to show," he said. "We're looking to diversify into other markets, and we have some really smart folks on our team. It's fun to be around other innovative folks."

The interest in the U.S. pavilion at Hannover provides companies such as FTI a captive and curious audience. Since 2016 is the first time the United States has been the Partner Country at Hannover Messe, it also provides many small and mid-sized manufacturers (a group the Germans call "mittelstand") a week-long introduction to U.S. opportunities.

"That means additional exposure and a prime location for U.S. companies, institutions, and economic development organizations, particularly those exhibiting in the U.S. Pavilions," said Daniel Gaines, senior international trade specialist for the U.S. Commercial Service. "It means that manufacturers of any size will stand out prominently."

Among the opportunities offered by the Commercial Service are:

  • Pre-show educational webinars that help companies prepare for the event.
  • Pre-show company promotions to potential overseas partners, helping U.S. exhibitors get maximum exposure to the potential buyers, partners, and investors at the show.
  • Onsite executive marketing counseling with commercial experts from U.S. embassies from across the globe, helping U.S. exhibitors create custom strategies for approaching key global markets.
  • Post-show follow-up support to make sure U.S. exhibitors know how to take the next step with the new connections they make at the show.

"It's a great opportunity," Weatherly said. "Between the U.S. Commercial Service and the state of Virginia, we have meetings already set up with potential business partners. We already have a good network overseas, so we're definitely looking forward to the show."



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me