Georgia Tech study: Sales, Lean, skilled worker help needed

Re-shoring on the rise in the state, according to a Georgia Tech study report

10/22/2012


For the first time since researchers began tracking the statistic, more Georgia manufacturers have been benefiting from in-sourcing – production work coming to them from outside the state – than have been losing work to other states and countries. CourtesThe 2012 edition of the Georgia Manufacturing Survey, conducted by Georgia Tech University, points to four areas of concern for manufacturers in that state. Topping the list is a need for more help in sales and marketing, with 36% of manufacturers citing this as a significant need.

Manufacturers also want more help with the Lean manufacturing operation, cited by 32% of manufacturers, and worker skills, with 24% needing more technical workers and 16% needing more workers with basic skills. Energy cost management is cited by 21% of manufacturers as an area of concern. That percentage has doubled since 1999.

The study also noted a significant increase in re-shoring of jobs to the state. According to a press release issued by Georgia Tech, nearly 16% of the companies responding to the survey said work had been transferred to them from outside Georgia, compared to slightly more than 14% that lost work to out-of-state facilities.

“We have finally seen a crossing of the lines so that more companies are benefiting from in-sourcing than are losing to outsourcing,” said Jan Youtie, director of policy research services in the Enterprise Innovation Institute at Georgia Tech. “It’s not a huge difference at this point, but it is a positive and consistent trend for the manufacturing community.”

Plant Engineering spoke with Youtie about the implications for manufacturers in Georgia and elsewhere. 

PE: What are Georgia manufacturers able to offer right now that seems to be attracting manufacturing investment? Is this occurring in specific sectors or across the board?

Youtie: Science-based manufacturers (those in medical device, chemicals, and petroleum industries) and large manufacturers are more apt to be engaged in in-sourcing.

PE: Another trend we’re looking at that is mentioned in the study is additive manufacturing. Is this a solid trend, or a technology more applicable to specific industries?

Youtie: Additive manufacturing is not widely used (fewer than 10% actually use it) though larger manufacturers are more apt to use it. There is no one type of manufacturer (by industry group) that stands out as being significantly greater users of this technology, although machine shops are less likely to use it.

PE: The study also focuses on the relationship between technology and employment. Has the Skills Gap emerged as a problem for Georgia manufacturers, and how are they addressing the issue?

Youtie: This survey highlighted a re-emergence of manufacturers’ concerns about technical skills but we continue to see that investment in training is relatively low ($100 per respondent on average). 

PE: What are the barriers to sustainability? Is it more profitable today to run a sustainable plant?

Youtie: Although we do not ask about the barriers to sustainable manufacturing, we do see that the vast majority of manufacturers are engaged in some aspects of sustainable manufacturers, such as eliminating waste materials sent to landfills and more than half have a goal to eliminate air or water pollution. Both of those areas appear to have their 2010 plans implemented by 2012. Other areas such as using renewable energy to run the plant still are not very common at all (set by only 7% of manufacturers in 2012), however, although the percentage with this goal has risen slightly from 2010 to 2012.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me