Georgia plant fined after explosion

MFG Chemical Inc. faces $77,000 in fines after OSHA discovered 20 safety violations that resulted in 40 employees being hospitalized for decontamination at the Dalton, Ga. plant.

12/11/2012


ISS SourceAfter a runaway reaction from an overheated reactor caused an explosion, MFG Chemical Inc. in Dalton, Ga., is facing $77,000 in fines for 20 safety violations which resulted in the hospitalization for decontamination of 40 employees of other companies working in the surrounding area, said officials at the Occupational Safety and Health Administration (OSHA).

The May explosion was the result of a runaway reaction from an overheated reactor. MFG Chemical makes a range of specialty chemicals for the water treatment, agriculture, pulp and paper industries.

During the production of coagulant 129, a compound used in water treatment, an increase in temperature caused the reactor to overpressurize, rupturing the dome cover and blowing a hole in the roof of the facility.

In response to the incident, OSHA conducted an inspection under the agency’s national emphasis program on process safety management for covered chemical facilities.

Nineteen serious violations involve exposing workers to fire and explosion hazards while they performed manufacturing duties, as well as failing to ensure that initial process hazard analyses were conducted; develop operational procedures that are safe, accurate and concise, and which include operating parameters such as emergency shutdown; provide training and implement safe work practices for contracted workers performing maintenance in a PSM-covered area; develop and implement a written mechanical integrity program for workers required to perform maintenance on and repair process equipment; develop emergency response procedures that include handling small chemical releases; identify permit-required confined spaces such as reactors, receivers and mixers, among others; ensure confined space permits were issued and documented prior to allowing workers to enter the spaces; ensure that eyewash/shower facilities were available and accessible for workers exposed to chemical burns; mount and identify the placement of portable fire extinguishers; and establish a preferred way of communicating an emergency evacuation.

A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known. The citations carry $76,300 in penalties.

One other-than-serious violation is failing to ensure a material safety data worksheet contained the required information. An other-than-serious violation is one that has a direct relationship to job safety and health, but probably would not cause death or serious physical harm. The citation carries a $700 penalty.

“This inspection has identified a wide range of safety hazards that need to be addressed in order to protect workers,” said Andre Richards, director of OSHA’s Atlanta-West Area Office. “It is the employer’s responsibility to provide a safe and healthful workplace.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me