Gather the data to look at the true value of a safety system

“Safety system” is an apt description for a never-ending operational process.

11/04/2011


In the past 3 years, I have noticed a substantial increase (more than 700%) in the number of calls and e-mails I have received from colleagues and friends who are involved in various manufacturing operations.

The reason for the increase appeared simple: a request for help related to safety issues or compliance with OSHA regulations in their segments. I continue to experience resistance when explaining the basic fundamentals of safety to operation managers, most of whom appear to be committed only to throughput.

It is easily discernable that the majority of those who exhibit this lack of knowledge do not understand the long-term benefits of a serious and committed plant, equipment, and resource safety system. I deliberately do not use the words “safety program” here as the word “program” is best used to describe something that has a beginning and an end.

“Safety system” is an apt description for a never-ending operational process.

So why all the recent fuss? Well, in May of this year, OSHA announced a new initiative that will target the various metals industries, most of which are located in the Great Lakes Basin. This includes Wisconsin, Illinois, Michigan, Pennsylvania, New York, Indiana, and Ohio.

The astonishing thing about the calls and e-mails I have received is the mind-set of the friends and colleagues I have communicated with concerning compliance. Of the 317 emails and 281 phone calls I have received in the past three years, only six colleagues have expressed concern with upgrading their safety systems to improve operating safety standards, as opposed to the majority asking, “How can we become at least minimally compliant?”

In almost every case where safety systems have been correctly installed, an improvement in throughput has been realized. So why is there so much resistance to properly installing safety systems?

Because the overall perception from management and employees alike is that it’s a hassle and it means they must learn a new and/or improved method of producing goods.

The immediate reaction is, “Sheesh, well this will waste an incredible amount of time, resources, and finances.”

So let’s examine the true actual cost of not having a properly maintained safety system in place.
Consider whether any of the following are applicable and if any show an increase or decrease within your operations.

  • LTIs (lost time incidents)
  • RIs (recordable incidents)
  • Medical insurance claims
  • Workman's compensation claims
  • Increase in employee absenteeism.

If you are experiencing any one of the above listed items, I will wager you have issues with all of the other items. And if you want the full scope of the effect these have on your operations and bottom line, get together with your human resources, medical, engineering, and operations staff and start comparing notes and costs.

Once you start the process of actually mining the data, it is quite easy to demonstrate the true cost associated with not having a well-rounded safety system in place.

Once you have assimilated all of the costs and add these costs into the costing/profit margins of your operations, I can assure you that you will have the undivided attention of those who actually count the beans.

Contact Dyer at dyerjerry(at)gmail.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me