Gas Technology: Estimated gas resources keep growing

What it means for energy markets

12/19/2011


By now, most informed energy buyers know that new exploration and drilling tools have unlocked huge resources of petroleum and natural gas in North America that previously were classified as “unrecoverable.” To that, add discovery of new conventional resources, improved deepwater drilling capabilities, and development of methods of extracting commercial natural gas equivalents from renewable resources. The result has been dramatic increases in estimated natural gas reserves.

Remarkable increase in resources

Michelle Bloodworth is Vice President for Business Development of America’s Natural Gas Alliance and was recently a speaker at a Technology and Market Assessment Forum sponsored by the Energy Solutions Center. She pointed out how potential U.S. natural resources had grown 58% from 2004 to 2008, and since then have increased even more. This is largely a result of inclusion in the total of shale-based gas resources in numerous locations in the country, the largest currently being the Marcellus Shale formation in New England, New York, Pennsylvania and Ohio.

Where just a few decades ago, some forecasters indicated the U.S. had only a few decades of natural gas resources remaining, today it is widely believed that we have over a 100-year supply. Bloodworth further indicated that the rate of development of new resources is not a one-time event. Industrial and commercial energy buyers have taken notice and are giving natural gas increased attention in their energy plans.

Favorable effect on prices

Bloodworth pointed out the potential impact of increases of resources on natural gas prices and utilization. First, she believes that newly abundant resources have reduced price volatility.Users know the resource is there and will be reliable over an extended period of time. Further, because a large portion of future gas is coming from geographically dispersed onshore shale plays, the impact of tropical storms on gas production and prices is being diminished.

Price stability from greater resources is confirmed by recent historical data and forecasts by the U.S. Energy Information Administration (EIA), which show only gradual price increases going all the way out to 2035. Annual long-term price forecasts for natural gas by EIA have been stepped down each of the last three years.

2006: A watershed year

Christopher McGill is Managing Director for Policy Analysis of the American Gas Association. He was a recent presenter at an ESC conference, and demonstrated how monthly total U.S. natural gas production started to sharply increase in 2006, largely as a result of shale gas production.

McGill also made the point that the enormous natural gas resources in the Marcellus Shale formation coincide with some of the most extensive interstate pipeline systems in the country, simplifying the infrastructure requirements to bring the gas to markets.

Industry paying attention

Industrial and commercial energy managers have not missed the attractive price and availability trends in today’s natural gas market. One snapshot of that is the recent announcement by Nucor Corp. that it is building a major new direct reduction steel plant on the Mississippi River in St. James Parish, La. The direct reduction process uses natural gas and ore pellets, along with recycled steel scrap, to create high quality sheet, plate and bar steel.

Brings domestic jobs

The plant is the first stage in a site development where construction might total $3 billion. This first plant alone will provide 500 construction jobs, and will involve 150 permanent Nucor jobs.

Long-term availability of domestic natural gas as a fuel for industry, utilities, commerce and residential accounts is one of the true good news stories of this decade. The U.S. and Canada will have abundant natural gas to fuel our economies for a long, long time into the future.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me