GAMS preview: A Vision of the Future, Part 2

In preparation for the 2016 GAMS Conference on Sept. 14 in Chicago, CFE Media asked our panelists to discuss some of the key issues facing manufacturing. This is one in a daily series of articles.

09/08/2016


Jack Nehlig, Phoenix Contact (top left), Rick Vanden Boom, Advanced Technology Systems (top right), Jose Rivera, CSIA (bottom left), Rob McGreevy, Schneider Electric (bottom right).The 2016 Global Automation and Manufacturing Summit (GAMS), presented by CFE Media, will bring together experts from all areas of the Industrial Internet of Things (IIoT) to look at not just the current state of IIoT but also at the potential benefits of deployment for the manufacturing industry.

The third GAMS conference takes place Wednesday, Sept. 14, beginning at noon. It is held in conjunction with the Industrial Automation North America (IANA) pavilion at the 2016 International Manufacturing Technology Show at McCormick Place in Chicago. The event is co-presented by Hannover Fairs USA.

In this age of manufacturing globalization, things can change quickly. We asked our panelists at this year's Global Automation and Manufacturing Summit to look into their crystal ball and imagine how manufacturing may change when IMTS convenes again in Chicago in 2018:

Jack Nehlig, Phoenix Contact: I think in two years IIoT will move quickly from concept to heavy adoption. The hot topics of 3-D printing and low-cost robotics should take center stage and will become the icons of the IIoT revolution. It's conceivable to imagine truly autonomous manufacturing, just as we are facing the reality of autonomous driving.

Jose Rivera, CSIA: Security is unfortunately likely to remain a challenge, and technology will continue to move to delivery to this challenge. I expect much more use of technology-maybe some robot applications-towards security. I also see an increase in the deployment of video surveillance everywhere and the use of complex analytics to evaluate life streaming but also combining it with lots of other information sources such as social media to try to anticipate potential threats before they happen.

There will be more concerns about privacy and the balance privacy versus security. We will be talking about this for a long time.

Rick Vanden Boom, Advanced Technology Systems: The increasing number of robots being used in service industries such as restaurants, hospitals, retail stores, etc.

Rob McGreevy, Schneider Electric: Those organizations that can collaborate faster and with greater accuracy will emerge as leaders in their respective markets. Another trend we predict is greater computing power to drive increasingly advanced analytics applications. Greater emphasis will be placed on learning how to better leverage operational data—which will become an emerging area of intellectual capital that must be carefully managed, governed and protected.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me