Gallium nitride power semiconductor market to exceed $1 billion by 2021

The emerging market for Gallium Nitride (GaN) power semiconductors is forecast to grow from almost zero in 2011 to over $1 billion in 2021, according to a new report from IMS Research.

03/13/2012


IMS Research - Excellence in marketing intelligenceThe emerging market for Gallium Nitride (GaN) power semiconductors is forecast to grow from almost zero in 2011 to over $1 billion in 2021, according to a new report from IMS Research. The research firm analyzed all of the key end markets for the products found that power supplies, PV inverters and industrial motor drives would be the three main drivers of growth.

While Silicon Carbide (SiC) power devices have been around for some years, GaN power semiconductors have only just appeared in the market. One of the key reasons for the promising outlook for GaN power devices is because GaN is a wide bandgap material which offers similar performance benefits to SiC but has greater cost reduction potential. “This is possible because GaN power devices will be grown on a larger, lower-cost Silicon substrate”, stated Richard Eden, Senior Market Analyst and author of The World Market for Silicon Carbide and Gallium Nitride Power Semiconductors. “The key market driver is the speed at which GaN-on-Si devices can achieve price parity with Silicon MOSFETs, IGBTs or rectifiers with equivalent performance.”

The speed of GaN transistor developments has accelerated in the last two years, possibly due to a realization that the market will be potentially huge. The launch of International Rectifier’s “GaNpowIR” and EPC’s “eGaN FET” devices started the low voltage market in 2010. The emergence of Transphorm and its 600V GaN transistors in 2011 created considerable interest in the prospects of GaN competing with high voltage MOSFETs and IGBTs. Six of the world’s top ten discrete power semiconductor suppliers are planning to launch GaN power devices in the near future, and some may already be making devices for in-house end equipment.

The report utilizes IMS Research’s extensive market research on technology markets to drill down into applications ranging from consumer electronics to industrial equipment and renewable energy. The first applications to adopt will be power supplies where the total system cost savings outweigh the unit price penalty of the device. These include PC and notebook adaptors, servers, etc., and domestic appliances like room air-conditioners, where efficiency improvements are being driven by Government initiatives or regulations. Once reliability and other potential problems are resolved, PV microinverters, electric vehicle battery charging and other new applications are likely to adopt GaN power devices in the future.

However, the market report found that there are some barriers to main-stream market acceptance of GaN power devices. The first is availability, as few GaN transistors are available in mass production. Competing manufacturers’ products are non-standard and there are no second-sources. Second, the technology lacks maturity so far. Overall device performance and GaN material defect rates need improvement. A third issue is design inertia; the need to educate customers about both the potential benefits of GaN and how to use the devices.

The latest findings and analysis on this important emerging market can be found in IMS Research’s recently released report “The World Market for Silicon Carbide and Gallium Nitride Power Semiconductors - 2012 edition.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me