Future depends on flexibility, the ability to compete

“Manufacturing for the Future” is not just a nice slogan, it was the subject of the June 3 discussion in downtown Chicago, sponsored by Financial Times and Machines Italia, a part of the Italian Trade Commission.

07/15/2008


“Manufacturing for the Future” is not just a nice slogan, it was the subject of the June 3 discussion in downtown Chicago, sponsored by Financial Times and Machines Italia , a part of the Italian Trade Commission. That a storied British business publication and an Italian commerce group would come to the Midwest to discuss global manufacturing ought to tell you something about where we are in the world right now. And where we are, according to the experts, is smack in the middle of an exciting, evolving, maddening and challenging environment.

“The world is a much more competitive place. People in high-cost countries have a lot to learn from those people based in low-cost countries,” said Financial Times manufacturing editor Peter Marsh. “The people who will do well are those who will straddle these two parts of the world.”

Dr. Pascal Bova of the Italian Trade Commission noted that some manufacturers leapt at the idea of low-cost manufacturing salaries and have discovered that also leads to lower quality and logistical issues that drive costs back up. “Now they are thinking that shipping their entire manufacturing operation abroad maybe was not such a terrific idea.”

Even in the face of a skilled worker shortage, Dr. Bova said the U.S. is missing an opportunity to retain talent trained in America. “The U.S. used to be a magnet for highly-skilled workers,” he said. “Changes in U.S. immigration laws and more aggressive recruiting have led to more than 200,000 workers trained in the U.S. returning to their countries of origin.”

Dr. Ambrogio Delachi is president of the DELMAC group , which makes machines for furniture manufacturing, and is also president of the Italian trade organization representing wood processors. He noted labor is not your biggest expense “if you have a good factory and a good product. Today, people require flexibility, low batches, quick changes. We’re trying to work just in time. Fifteen years ago, we asked one of our biggest customers what their minimum batch size was, and they said 10,000 pieces. We’re looking at batches of 200 pieces today.”

Sean Monahan, a VP at consultant A.T. Kearney, noted five major trends in manufacturing:

  • Globalization

  • Demographic changes

  • Consumption patterns

  • The use of natural resources

  • Regulatory and activism issues.

    • “You can begin to tailor your manufacturing operation only after you’ve fully identified how you intend to compete,” Monahan said. “Develop a framework that works for you.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me