FSMA Fact Sheet

Implementation of the Food Safety Modernization Act (FSMA) in 2014 will have an impact on the production, distribution and transportation of food in the United States.

03/19/2014


Implementation of the Food Safety Modernization Act (FSMA) in 2014 will have an impact on the production, distribution and transportation of food in the United States. According to the FDA, which will oversee the new regulations, “the legislation transforms FDA’s approach to food safety from a system that far too often responds to outbreaks rather than prevents them. It does so by requiring food facilities to evaluate the hazards in their operations, implement and monitor effective measures to prevent contamination, and have a plan in place to take any corrective actions that are necessary.”

The impact on the manufacturing sector is going to be significant. Among the requirements in the FSMA that affect manufacturing:

Mandatory preventive controls for food facilities: Food facilities are required to implement a written preventive controls plan.  This involves:

  • Evaluating the hazards that could affect food safety
  • Specifying what preventive steps, or controls, will be put in place to significantly minimize or prevent the hazards
  • Specifying how the facility will monitor these controls to ensure they are working
  • Maintaining routine records of the monitoring
  • Specifying what actions the facility will take to correct problems that arise. 

Mandatory produce safety standards: The FDA must establish science-based, minimum standards for the safe production and harvesting of fruits and vegetables.  Those standards must consider naturally occurring hazards, as well as those that may be introduced either unintentionally or intentionally, and must address soil amendments (materials added to the soil such as compost), hygiene, packaging, temperature controls, animals in the growing area and water.

Authority to prevent intentional contamination: The FDA must issue regulations to protect against the intentional adulteration of food, including the establishment of science-based mitigation strategies to prepare and protect the food supply chain at specific vulnerable points.  (Final rule due 18 months following enactment)

Among the new tools covering inspection are:

  • Mandated inspection frequency:  The FSMA establishes a mandated inspection frequency, based on risk, for food facilities and requires the frequency of inspection to increase immediately.  All high-risk domestic facilities must be inspected within five years of enactment and no less than every three years thereafter.  Within one year of enactment, the law directs FDA to inspect at least 600 foreign facilities and double those inspections every year for the next five years.
  • Records access: FDA will have access to records, including industry food safety plans and the records firms will be required to keep documenting implementation of their plans.
  • Testing by accredited laboratories:  The FSMA requires certain food testing to be carried out by accredited laboratories and directs FDA to establish a program for laboratory accreditation to ensure that U.S. food testing laboratories meet high- quality standards. 

For specific information about FSMA, go to the FDA Website, www.fda.gov.

(Source: FDA)



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me