Frost, Sullivan report finds industrial automation 'is at a crossroad'

With market at saturation, new “megatrends” are emerging, report finds.

11/14/2011


The field of industrial automation is at a crossroads, according to a report released by Frost and Sullivan.

The report finds automation and control solutions product portfolio is nearing saturation, either directly or indirectly. A major trend underlining this development is the narrowing product definition between individual products, in particular the programmable logic controllers and distributed control system product line.

The Frost and Sullivan report on the Automation and Control Systems Market examines the current market scenario and future landscape, as well as details on game changers in factories of the future.

“Vendors have currently emerged with hybrid products that combine PLC and DCS functionality as a means to counter high competition and gain end-user recognition,” said Frost and Sullivan senior research analyst Karthik Sundaram. “Despite economic advantages, the emergence of such products has clouded end-user perception to a large extent, and it remains to be seen if this technical strategy yields expected results.”

Clearly noticeable is a significant shift from the traditional parameters determining the ACS market. Currently, it is a company’s product portfolio that yields the maximum influence in the automations and controls market space, followed closely by service support and cost considerations. This, however, is set to change.

“In the coming years, the emphasis on the IA product portfolio is likely to diminish,” said Sundaram. “In contrast, the need for globalized service support, coupled with cost factors, is expected to gain significant momentum.”

As the ACS market steadily graduates towards the next level, it will offer automation vendors challenging opportunities for growth and excellence. Vendor participants will need to be in tune with ongoing developments and enhance their ability to compete and succeed in the future of factories.

“Frost and Sullivan’s vision of the factory of the future is catalyzed by five megatrends - cyber security, mobile and wireless technology, enterprise ecosystem, cloud computing and sustainability,” said Sundaram. “These megatrends will influence all aspects of an industrial enterprise.”

For instance, operating personnel in future factories will not be confined to work stations inside control rooms. The advent of tablets and mobile platforms will enable them to track production lines, perform maintenance operations and monitor process issues from their tablets – all while on the move.

The adoption of secure cloud computing technology will enable factories access to relevant strategic data from the Internet to execute real-time decisions and enhance operational efficiency.

“In essence, future factories will have secure wireless networks supporting a highly automated production process, seamlessly interlinked with enterprise software working through the clouds,” said Sundaram. “A high-end factory will also involve collaborative manufacturing promoting operational excellence and aiding sustainability.”

Information provided by Frost and Sullivan.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me