Four mitigation strategies for solving your plant's reliability problems

How to recognize employee behaviors that can negatively impact a plant's reliability and/or product quality and do something about it.

05/01/2014


Let’s talk about the four employee traits present in your plant that are possibly limiting your ability to improve up-time, quality, and reliability. The first step is to recognize that these traits exist, and then The Maintenance and Reliability Professionals Bloggoing forward, plant managers are better equipped to implement a plan to mitigate or eliminate them. Below I have identified four employee behaviors that can negatively impact a plant's reliability and outlined a series of mitigation strategies. While proper risk and communication planning can best prevent some of these behaviors, we will dissect a series of reactive responses.

1. Negativism: The disposition to project the worst case scenario

Sounds like: "This CMMS is horrible. It takes 16 screens to do what I could do in one second using the old system."

Mitigation: Focus on the positive and don't let meetings become bashing sessions. Celebrating little successes or steps in project plans can turn a negative conversation around.

2. Criticism: The disposition of being incomplete and/or imperfect

Sounds like: "This new process is not good enough to roll out. Let's continue to work on it."

Mitigation: Create a pilot area where it is OK to fail and trial the processes there with a mind for continuous improvement. These safe zones clear the way and the fear of failure and allow for progress not paralysis.

3. Skepticism: The disposition to always question but never commit

Sounds like: "I'm not sure we have enough data to show that this will work. Let's collect more." Or, "That will never work here. We are too different."

Mitigation: Show case studies or real-world examples from similar sites that have succeeded. Visit sites or invite sites to visit you once they have had success. In addition, plant manager can allow negative folks to mix with their positive ones.

4. Cynicism: The disposition to view other employees as selfishly motivated

Sounds like: "Maintenance just wants us to do autonomous maintenance so we can do their work for them"

Mitigation: Fully communicate the intent of the initiative and how it affects each individual, as cynicism loves to attack the ill-informed.

Join the discussion: What are you doing on your site to address these negative behaviors?

Shon Isenhour specializes in Business Process Management, Adult Education, Strategic Planning, Organizational Change Management, Leadership, and Reliability Engineering with SMRP and reliabilitynow.com. Edited by Jessica DuBois-Maahs, associate content manager, CFE Media, jdmaahs@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me