Ford to start $773 million plant expansion in Michigan in 2013

Six facilities to get new equipment, technology; 2,350 jobs created

12/28/2012


Ford Motor Company is spending more than $773 million on new equipment and capacity expansions across six manufacturing facilities in southeast Michigan as it delivers on a commitment to invest $6.2 billion in U.S. plants by 2015. Courtesy: Ford Motor ComFord Motor Company is spending more than $773 million on new equipment and capacity expansions across six manufacturing facilities in southeast Michigan as it delivers on a commitment to invest $6.2 billion in U.S. plants by 2015.

The investments in Michigan will create 2,350 new hourly jobs and allow the company to retain an additional 3,240 hourly jobs. The 2,350 new positions are part of the 12,000 hourly jobs that Ford is adding across the U.S. by 2015.

“Even as we wrap up an incredibly busy year of capacity expansions and product launches, we are continuing to look to the future,” said Jim Tetreault, Ford vice president of North America Manufacturing. “These investments, many of which are already under way, will ensure our southeast Michigan manufacturing facilities can support our aggressive growth plans.”

Expansion work at several plants started earlier this year to increase Ford’s capacity to provide transmissions and axles to support growing demand for fuel efficient vehicles and F-Series pickup trucks.

In addition, over the next six months Ford will bring a new stamping press on line at Michigan Assembly Plant; install equipment for four new stamping presses at Dearborn Stamping Plant; and finish expansion work at Flat Rock Assembly Plant to produce the new Fusion next year.

Specifically, Ford is making investments at the following locations: 

  • Michigan Assembly Plant - $59.4 million for stamping press line expansion
  • Dearborn Stamping Plant -$305 million for plant modernization, new press lines, scrap conveyor system and other machinery and equipment
  • Flat Rock Assembly - $161 million for machinery and equipment to assemble the new Ford Fusion and as an additional production facility
  • Sterling Axle Plant - $86 million for machinery and equipment investment to meet axle demand increase and future model changes
  • Van Dyke Transmission - $87.7 million for machinery and equipment investment to meet capacity expansions for 6F35 and 6F50 transmissions
  • Livonia Transmission - $74.7 million for machinery and equipment investment for transmission expansion and test equipment 

Source: Ford Motor Company.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me