Fluke offers new tools for vibration, energy analysis

Company unveils a series of new tools designed to deliver diagnostics for thermal imaging, thermometers, and vibration analysis at a lower price point at its press event in Everett, Wash., on April 5.

04/09/2012


Fluke 430 Series II Three Phase Power Analyzers uses a patented algorithm to measure energy waste. Courtesy: Fluke

At its press event in Everett, Wash. Last week, Fluke Corporation unveiled a series of new tools designed to deliver diagnostics for thermal imaging, thermometers and vibration analysis at a lower price point. Fluke also told a group of more than 60 international journalists about a new power analyzer to quantify energy wasted by power quality issues. The Fluke 430 Series II Three Phase Power Analyzers uses a patented algorithm to measure energy waste.

The goal, according to Fluke officials, is to “help facilities reduce electrical power consumption and improve the performance and lifespan of electro-mechanical equipment.” The tool provides data on energy monetization, energy assessments after improvements are installed, load studies and a long-term analysis. The overall goal is to detect power quality issues before operations are affected.

Fluke 62 Max and 62 Max+ Infrared Thermometers: The test tools are dust, water and drop resistant. The 62Max+ tool uses dual rotating lasers to identify spot sizes. Courtesy: FlukeAmong the other products introductions at the press event:

-- The Fluke 62 Max and 62 Max+ Infrared Thermometers: The test tools are dust, water and drop resistant. The 62Max+ tool uses dual rotating lasers to identify spot sizes. Because infrared measurement does not require making contact with the surface being measured, technicians can make the measurements from a distance, away from moving machinery or live electrical connections. “If we’re looking at a one-inch breaker, we need to focus on both spots on that breaker,” Steve Ulrich of Seattle-area based Valley Electric, told the press conference. “We’d use this on electrical equipment – motors, bearings, and look at certain amounts of rotating equipment.”

Fluke 805 Vibration Meter: It’s a portable multifunction vibration screening tool that provides quantifiable information on the bearing and overall health of motors and other rotating equipment at a much lower price point. Courtesy: Fluke-- The Fluke 805 Vibration Meter: It’s a portable multifunction vibration screening tool that provides quantifiable information on the bearing and overall health of motors and other rotating equipment at a much lower price point than in the past. Fluke already offers the 810 vibration meter at about $8,000; the 805 price point will be about $1,800. “The 810 is a very sophisticated product,” said Demi Namli of Fluke.

“We see the 805 used as more of a frontline vibration analysis tool,” Namli said.

Fluke infrared analysis tools: Fluke Ti 110 and Ti125 have two models for industrial or for building diagnostic applications, and the Ti100 is designed for basic infrared uses.  Courtesy: Fluke-- A new line of infrared cameras that will put infrared analysis tools in a lower price range. The Ti 110 and Ti125 have two different models for industrial or for building diagnostic applications, and the Ti100 is designed for basic infrared uses. As prices continue to come down for infrared cameras are making them more accessible for general uses as a maintenance tool.

“There are so many applications out there, waiting for right tool to come around,” said Michael Stewart of Fluke. “Anybody that has a thermal imager can realize some savings. It takes a little knowledge, but can do some amazing things with them.”

“The potential savings are huge,” said Jim Fritz of the Snell Group. “Seeing more smaller manufacturers using this. With everything at a lower price point, more and more people are using it. It really opens up the market.” The overall goal of the tool releases announced at the Fluke event were to underscore the company’s emphasis on putting sophisticated diagnostic tools in the hands of more plant personnel at the maintenance and energy management level.

"By optimizing your measuring process and optimizing process, you can have an efficient manufacturing process,” said Fluke metrology guru Jeff Gust.

www.fluke.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me