Flowserve launches new Learning Resource Center training labs

06/02/2006


Flowserve Corporation, a global provider of fluid motion and control products and services, recently launched new instructional labs for its Learning Resource Center, which offers hands-on training in a simulated plant environment. The labs offer hands-on technical facilities for pump, valve and seal system optimization and maintenance training.

Three of the center's training labs enable participants to analyze equipment failures and determine their causes, learning first-hand how to prevent pump, seal and control valve failure. The inclusion of equipment from various manufacturers ensures that learning takes place in a real-world environment.

Four power labs feature 26 operational pumping systems, many with transparent piping and housings so participants have a real-time view of fluid motion and typical pumping system failures. Participants also learn to create pump curves, troubleshoot cavitation problems and perform "dead head" tests and other vital diagnostics.

Up to 50 percent of the training time at the LRC is spent working in the operational labs with the pump, valve and seal systems plant professionals use every day. Courses are specifically designed to increase participants' skill levels in equipment selection, installation, repair, failure analysis, and troubleshooting. Participants return to work with practical knowledge to improve plant performance, increase machine availability, lower the cost of maintenance, and improve plant safety.

"The Learning Resource Center presents another opportunity for Flowserve to help customers achieve success in their businesses," said John Jacko, chief marketing officer for Flowserve. "Utilizing equipment from Flowserve and other manufacturers enables our training center to create a real-world environment."

The LRC's instructional team has more than 100 years of combined experience in industries from water treatment to aerospace. Trainers have handled many specific engineering, operator and mechanical problems and are able to recreate and solve many of those problems in the operational labs.

Class size is limited, providing ample opportunity for participants to experiment and test the "what-ifs" of the equipment they use every day, as well as ask questions and discuss theoretical topics.

The Learning Resource Center is located in Irving, TX. Courses are also offered at Flowserve Learning Centers across the U.S. and on-site at plant locations around the world.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me