Flowmeters – A closer look at the numbers

IMS Research forecasts coriolis flowmeters to overtake differential pressure (DP) flowmeters as the largest flowmeter market in 2014, having replaced magnetic flowmeters as the second largest market in 2012.

11/28/2011


For the purposes of this discussion, revenues made from both the primary element and differential pressure transmitter have been considered in the numbers relating to DP.

This is a bold statement and has certainly generated a lot of talk. It seems everyone has an opinion on the flowmeter industry but opinions vary based on the country and industry in which the individual represents. With that said, the below summarizes my view.

While the market for coriolis flowmeters is forecast to be larger than that of DP and electromagnetic in 2014, this is only reflective of the global market in terms of dollar revenues. In the Americas, revenues for DP are forecast to remain larger than those of coriolis through 2015. While in EMEA, coriolis revenues have already surpassed those of DP. Also, revenues only form part of the picture. This was illustrated by one of my peers, who kindly pointed out that analyzing the market this way was similar to comparing a Buggati Veyron with a mid-range Ford.

With this being the case, unit shipments can also tell a different story. In 2014, IMS Research forecasts over 430,000 DP flowmeters to be shipped globally versus less than 170,000 coriolis. With that said, coriolis flowmeters represent a much smaller portion of the market than dollar ($) revenues reflect.

The replacement of mechanical technologies does not imply that mechanical and differential flowmeters do not offer a valued solution in the market. Their low cost, familiarity, range, and ease of calibration ensures they will have a role to play in the market for quite some time. Again, that role will certainly be dependent on the individual application.

Despite being the largest market in dollar revenues or unit shipments, I’ll leave you to decide the outcome. Both coriolis and DP face competition from other flowmeter technologies and are subsequently used to varying degrees, by application. Accounting for nearly a quarter of global flowmeter revenues, the oil and gas industry is the largest segment of the flowmeter industry. It is also home to several flowmeter technologies. While much of the talk surrounds coriolis, ultrasonic and DP flowmeters, the industry is also starting to look at vortex flowmeters, primarily in refineries. Furthermore, with enhanced oil recovery techniques, like water injection, electromagnetic flowmeter use is also finding traction in the oil and gas sector. 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me