Five steps to measure ERP's value

Return on investment (ROI) from an enterprise resource planning (ERP) project can be realized by forming a team, documenting the state of business processes, and more.

05/03/2018


Courtesy of: rawpixel.com on UnsplashPeople often ask about the value an organization can expect when investing in a new enterprise technology solution.Through experience it is clear that return on investment (ROI) from an enterprise resource planning (ERP) project depends on proper planning using a 5-step ERP methodology:

1. Forming a team of process owners to serve as the ERP project team. This team, led by its chief process owner, develops a strategy to review all business processes impacted by an ERP solution. It identifies all functions by department and business process flow and gathers and analyzes reports from sales, shop floor data collection, inventory, accounting, quality, etc.

2. Documenting the current state of business processes to find strategic areas for improvement. An ERP project is the ideal time to take a hard look at business processes that may have evolved in various ways over time with little documentation. Now is the time to reexamine all processes to determine their strategic value, and to identify waste. By documenting the current state, the team finds the ways to fully leverage the best practices afforded by modern ERP systems.

3. Educating business process owners on best practices of current ERP systems. A comprehensive and strategic approach to education is a necessary ingredient for successful technology transformation. It's tempting to skip this step, however, working with industry analysts, expert consultants and vendors will illustrate best practices. In most cases, the team will identify solutions to the problems of wasted processes, redundant data, and unnecessary manual steps uncovered by the current-state mapping and documentation exercise.

4. Reviewing current processes to define the desired improved future state. Here is where the team develops best-fit business process flows. Waste in current processes is found and best practices and future state requirements are identified as the team creates the "to-be" maps of the future state. The team looks at ways of reducing waste within existing systems, identifies midterm improvements that require IT investment and spells out the functional improvements enabled by the new workflow from the ERP.

5. Make the business case for change. Finally, the team reviews the list of benefits identified in the previous business process improvement steps, documenting ROI for each. It's critical to link the improved processes to improved performance by optimizing current state metrics. The team can document how the investment in an ERP system will reduce inventory costs, reduce stock-outs, improve cycle time, etc.

Enterprises following these five steps during an ERP software selection project will achieve considerable value from their new ERP solutions. With proper planning and execution, manufacturers and distributors will meet their business process improvement goals, whether it's adding automation or reducing cycle time, for true business transformation.

This article originally appeared on Ultra Consultants' Blog. Ultra Consultants is a CFE Media content partner.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me