First Chinese supplier breaks into top 10 LED rankings in 2013

China's investments have finally paid off as one of it's companies has joined the ranks as one of the top companies in LED manufacturing capacity.

07/07/2014


Top 10 global suppliers of packaged LEDs in 2013 (ranking by revenue in US Dollars). Source: IHSChina’s massive investments in light-emitting diode (LED) manufacturing capacity are paying off, with a Chinese company entering the top ranks of the global market for the first time ever, according to IHS Technology

China’s MLS Electronics Co. Ltd. in 2013 rose to the No. 10 rank in the worldwide market for packaged LEDs, up from 14th place in 2012. With the other top 10 players based in South Korea, Japan, the United States, Germany and Taiwan, as presented in the attached figure, this represents a first for China’s burgeoning LED industry. 

“Since 2011, most of the new LED production capacity that has been added worldwide has occurred in China,” said Jamie Fox, principal LED analyst for IHS. “Because of this, it was inevitable that Chinese companies eventually would penetrate the ranks of the top 10 LED suppliers. MLS was first to join the global elite, having established itself as the clear leader in the Chinese market by capitalizing on strong domestic demand. For the major suppliers, MLS’s ascent into the market’s upper ranks represents a clear signal that Chinese firms soon will become major competitors in the global LED business.” 

These findings come from the IHS LED Intelligence Service

China’s LED market lights up 

MLS is one of many Chinese LED suppliers that have sprung up amid the surge in production. However, the other firms do not even rank among the top 20 global suppliers. China’s LED supply base is massive and highly fragmented, with thousands of small manufacturers located across the country. 

“Despite leading the domestic market, MLS accounted for less than 10% of Chinese LED revenue in 2013,” said Alice Tao, China LED analyst at IHS. “The next five largest LED suppliers in China represented only about 20% of the market.” 

With the rise of LED manufacturing capacity in China, concerns have risen relating to overcapacity. Some of the equipment purchased for metal-organic chemical vapor deposition (MOCVD) manufacturing—the most important process step in LED production—is now sitting idle in China. Observers have fretted that the overcapacity could result in the shutdown of some Chinese suppliers. 

However, only a few of the smaller Chinese vendors so far have closed their LED operations. Most of the top companies remain active in the market, with some posting strong profit margins. 

An insular market goes global 

MLS and the smaller Chinese suppliers mostly compete among themselves for a share of the large domestic LED market. The international portion of sales for these companies is very small. 

At the same, the extremely low prices in the Chinese market make the country inaccessible to overseas suppliers. Because of this, foreign LED makers don’t encounter Chinese competitors very often. 

But that situation will change rapidly. IHS expects the LED revenues of Chinese vendors to grow steadily over time, as the country’s economy continues to grow strongly. Because of this, Chinese LED suppliers will begin to sell more internationally and come into competition with foreign rivals. 

Barriers to entry

Both intellectual property and quality are concerns for international customers that are considering Chinese suppliers.

However, several factors suggest these concerns could be alleviated over time. These factors include patent expirations, China’s established history in other industries, the sheer volume of manufacturing capacity in the country and the fact that many LED lamps are assembled in the nation.

Top-tier LED suppliers such as Nichia, Osram, Lumileds and Cree so far have seen only a small impact from Chinese vendors on their sales. This is especially true in the market for general lighting in regions such as Europe and the Americas. Such will not necessarily be the case by the end of the decade.

For instance, MLS has started 2014 on a strong note, and may have even ranked among the IHS top 10 LED suppliers in the first quarter.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me