Fine tuning your preventive maintenance schedule

A good CMMS system can deliver the information users need to better fine-tune their PM schedules. If a less-rigorous PM schedule gets the maintenance team slapped with a corrective work order, it’s time to adjust.

11/28/2012



What comes first: corrective or preventive maintenance? Well, the industrial engineers would say “PM,” of course. But the reality of busy schedules and a reduced labor force often set in and best laid plans slip.

Example: Company X has older, inefficient ventilation in one of its production facilities. The HVAC breaks down frequently, is expensive to run, and finally management agrees to replace it with a brand new, more energy efficient system. Since the conversion, air quality and temperature have never been better, and the cost savings is tangible.

During installation, the manufacturer strongly advises Company X to follow a recommended maintenance plan. The maintenance supervisor asks her administrator to make sure the PM calendar is set up in the CMMS. The team is so happy to not be dealing with the older, often malfunctioning system they wonder “why bother doing anything; the system is brand new!”

PMs are dutifully set up and the automated reminders/PM work orders churn out every month. The challenge begins when the technician assigned tries to balance PM work orders on a combination of assets, including a shiny, new ventilation system and other antiquated, poorly-running systems that should be replaced.

The reality is that technicians will likely continue to “MacGyver” older systems to keep them running and the new system will be ignored since it is humming along nicely. There are just not enough hours in the day. Reality forces us to make compromises.

For example, perhaps the environment of this new system is not as harsh as, say, the average saw mill or steel plant, and maintenance staffers agree they can skip a PM or two. Not that they would delete the PMs—they would use a specialized status in the CMMS system to indicate that the PM was “skipped” due to lack of need, but continue to monitor.

Sometimes these choices have to be made. If all of a sudden the CMMS issues an actual corrective maintenance work order for this system, it indicates that the team has to get back to a more frequent schedule, but it may not need to be as frequent as the manufacturer’s recommendations.

A good CMMS system can deliver the information users need to better fine-tune their PM schedules. If a less-rigorous PM schedule gets the maintenance team slapped with a corrective work order, it’s time to adjust. Sometimes it is the other way around. If the CMMS system tells the maintenance manager ‘all is well’ with an asset, that may be a signal to shift resources to other equipment in greater need. 



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Pipe fabrication and IIoT; 2017 Product of the Year finalists
The future of electrical safety; Four keys to RPM success; Picking the right weld fume option
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Control room technology innovation; Practical approaches to corrosion protection; Pipeline regulator revises quality programs
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Power system design for high-performance buildings; mitigating arc flash hazards
VFDs improving motion control applications; Powering automation and IIoT wirelessly; Connecting the dots
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me