Find the point of constraint to fix plant inefficiencies

Plant managers get more information than ever. For some, the issue is not measuring the performance of equipment as much as it is managing the mountain of data that comes streaming out of PLCs, probes and sensors. At its Performance Management Executive Breakfast on April 30 in Chicago, officials from Activplant, Microsoft and Deloitte discussed the idea of finding the places on the manufacturi...

05/15/2007


Plant managers get more information than ever. For some, the issue is not measuring the performance of equipment as much as it is managing the mountain of data that comes streaming out of PLCs, probes and sensors. At its Performance Management Executive Breakfast on April 30 in Chicago, officials from Activplant, Microsoft and Deloitte discussed the idea of finding the places on the manufacturing line that needed the most attention and spending resources to solve those specific problems.

“We need to reduce the overproduction of information,” said Doug Gish, principal with Deloitte. “We need to expand our definition of waste in manufacturing to include information. Let’s make sure we expend time where it matters.”

One way to do that, according to Activplant founder and chief product strategist Dennis Cocco, is to find where the constraint to productivity is on a manufacturing line. “Instead of focusing on individual workstations’ performance, downtime and lifecycles, focus on the flow of product through the facility and understand the chronic disruptors to product flow,” Cocco said.

Rather than focusing on events, such as bearing failures, Cocco said trending of manufacturing line performance helps focus attention on where the process slows up. Fixing those consistent constraints, he said, drives up productivity and frees resources for use elsewhere. “Where do you invest your productivity?” Cocco asked.

Coca Cola Amatil of Australia is an ActivPlant client and has used its Throughput Analyzer to focus on constraints in the bottling and canning process. “Activplant didn’t solve the problem,” said Wayne Luxford of Coca Cola Amatil. “Precise, accurate and continuous data pointed us in the right direction. It gave us the data to solve the problem.” The result was an increase of 500,000 cases a year of product created without increases in labor costs.

“It’s about having information and choosing what you do with it,” Activplant president Chuck Frosst said. “How do you lead that change in your organization? Am I driving a culture that shows each employee that when they improve a process, they are adding value to the organization and not just doing a job?”

“Operator involvement is often overlooked,” Cocco said.

“We’re buried with data, but there’s not enough information,” Gish added. “You need to look at what are the three to five key things I need to look at to understanding the health of my organization.”





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me