Find a path to compromise on the plant floor

Nolan Lestage, a utilities supervisor for West Liberty Foods in Mount Pleasant, Iowa, shares his story of his manufacturing experience and the pride he has in his work.

05/19/2017


Nolan Lestage, a utilities supervisor for West Liberty Foods in Mount Pleasant, Iowa, shares his story of his manufacturing experience and the pride he has in his work. Courtesy: Leading2LeanIn its "People of the Plant Floor" video series, Leading2Lean, a Plant Engineering content partner, has shared the stories of manufacturing workers and their pride in their work. One of the people they interviewed was Nolan Lestage, a 33-year-old utilities supervisor for West Liberty Foods in Mount Pleasant, Iowa. The edited transcript of the video follows. The full video can be found here.

I started out in a small town and moved to a bigger town when I was about six years old, so I have always been kind of a small country boy.

I like to be outdoors, I go fishing a lot. Between my family there and growing up on the river here in Burlington on the Mississippi, and that's what we did every weekend, we went out on the river. Fishing was always peaceful. Just relaxing, just being out on the water in general. I learned the hard way, you know, I didn't have dad there to help me all the time, sometimes I'd think, "Well maybe, what would he do?"

(I remember) I came home from work and it was probably about my 13th day in a row and I was working Sundays. I was just saying, "Am I going to have a life beyond work? Am I going to have a weekday off, weekend off?" I kind of decided that night that I wasn't going to go back and I was going to look for something new.

I started at West Liberty Foods in 2003. Before that I worked at a temp agency. After about a year and half, and I was still working at the temp agency and not getting hired on, I needed to do something for myself better. I needed more money, needed better benefits, more stability in my life.

And now I have a job to come to everyday. When I was a temp, you don't know if you are going to be employed the next day, because maybe they don't need you anymore after that. Here, what we are processing and what we are making is something that is needed.

I started as a molder on the line. I was one of the guys that stood there and took the meat off the conveyer and put it into the machine. I kind of got interested in how the machines run; the settings of them, how to make them run how you really want to. Then one day, there was a job bid outside H.R. for maintenance, and I thought, "Well, you don't know if you never try, right?" So I put in for it, and went through the interviews, and they picked me.

My first couple of supervisors kind of took me under their wing, and there were a couple of older mechanics that I'd follow around, and they'd give their knowledge out, and help me along.

Transitioning from an hourly employee to a management position, that relationship changes. In the end, I think it's worked out, and we all have to get along, we all have a job to do. Being angry at somebody all day, that's not going to get you anywhere. I think talking to them, and working out your problems is best. Maybe the way I think it should be done is not the best way. You know, talk with your employees, maybe they have a better idea. You've got to hear them out. That's why I like to try and be the peacemaker—compromise, keep everybody happy.

If I don't train them right, or give them bad knowledge, or something incorrect, it could affect everybody. Just like if I was to go fishing, I like to have quality fishing equipment, or quality fish that we brought in on the fishing line.

We want to make a good product. At the end of the day we're all people, and compromise on whatever the problem is to solve it and move on with our day. And if there is a disagreement, work it out, talk it out.

I had no idea I'd make a career out of this, but I have. I've learned a lot, and got a lot of good knowledge and training out of it, and it's been a good experience.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me