Festo gets Hannover Messe hopping

Festo brought a kangaroo to Hannover Messe. That’s one of those sentences they told us we’d never have to write when I went to journalism school.

04/07/2014


The opening press tour at Hannover Messe each year allows the journalists to get a preview of the booths at the annual industrial trade event. While all of those tours show off great innovation, the real fun is always at the Festo booth, which has featured flying penguins, soaring birds, and bionic hands that operate by remote control. This year, Festo showed off its research into a bionic mechanical device by developing a kangaroo that jumps when prompted by the wave of a hand.

The result of the two years of research and development on this bionic kangaroo is somewhat whimsical, but there are also practical applications at work. Engineers used electrical drives to simulate the kangaroo's powerful jumping motion, a sensor system in the body and legs, and motorized tail and hips. All of them have to work together to accurately simulate the natural motion of the kangaroo, including a shift of its center of gravity before takeoff and energy storage when it lands.

The BionicKangaroo by Festo uses electrical drives to simulate the kangaroo's powerful jumping motion, a sensor system in the body and legs, and motorized tail and hips to accurately simulate the natural motion of the kangaroo. Courtesy: Bob Vavra, CFE Me"The BionicKangaroo demonstrates several aspects of integrated automation at once," Festo officials said in its press kit. "The system brings its components together in the smallest space. The many functions are coordinated using a highly complex control technology system."

The only thing missing was the pouch. Some innovations take more time.

Something fishy here?

There is bilateral support between German government officials and American business leaders for the proposed Transatlantic Trade and Investment Partnership (TTIP). That trade deal, also known as the Transatlantic Free Trade Agreement (TAFTA), was the primary focus of Monday afternoon's U.S. Trade and Investment Summit, hosted by Hannover Fairs USA and Hannover Messe. The event featured speakers from both German and American interest groups.

TTIP would look to reduce trade tariffs and other trade barriers, and would seek to harmonize standards between the two large global trading regions. Negotiations are under way to complete this trade deal, and it has run into opposition from various groups on both sides of the Atlantic.

The U.S. Chamber of Commerce is a strong supporter of the trade deal, and its president, Tom Donohue, noted at the forum that one of the essential elements of this trade deal is speed. "The first thing we need to do is move quickly," Donahue said to more than 100 business leaders, many from U.S. states looking to attract German investment. "If we let it sit too long, it's going to be like old fish."

During a panel discussion with U.S. and German business leaders, Bernhard Mattes, president of AmCham and vice-president of the board of Ford-Werke GmbH, noted Donohue's remarks and said, "All the facts are on the table. Let's just do it. Let's get it done. Fresh fish is what we need."

Putting it together

Hannover Messe is by far the largest industrial trade show in the world, with 5,000 companies from 65 countries displaying their products and more than 250,000 attendees expected for the week. What is remarkable is the logistics of pulling such a show together. With that in mind, here's a before-and-after look at the show floor in the Industrial Automation hall 24 hours apart. On the left is Sunday's chaos; on the right is Monday's busy exhibition.

Here’s a before-and-after look at the show floor in the Industrial Automation hall 24 hours apart. On the left is Sunday’s chaos; on the right is Monday’s busy exhibition. Courtesy: Hannover MesseHere’s a before-and-after look at the show floor in the Industrial Automation hall 24 hours apart. On the left is Sunday’s chaos; on the right is Monday’s busy exhibition. Courtesy: Hannover Messe

The Terminology Gap

As the U.S. and the European Union discuss a bilateral trade agreement, one of the first things you note is that its name isn't quite settled. The leading choice is TTIP, standing for the Transatlantic Trade and Investment Partnership. It's also been called the Transatlantic Free Trade Agreement, but it may be that TATFA hasn't caught on with most folks talking about it because the acronym NAFTA still is unpopular in some circles. Of course, some people opposed NAFTA because it was going to drive all American manufacturing jobs to Mexico, and that never quite happened.

The same issue appears with the way to describe the integration of automation IT and production. In the U.S., the leading term is "Internet of Things," or IoT. In Europe, especially in Germany, the term is "Industry 4.0," signifying the 4th Industrial Revolution. We may not be able to agree on everything, or even most things, but we should be able to agree on what it is we're calling what we're not agreeing about.

Plant Engineering will be providing daily coverage of the Hannover Messe conference at plantengineering.com.

Festo is a CSIA member as of 3/5/2015



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me