FEMP tags NEMA Premium motors

03/01/2006


The Federal Energy Management Program (FEMP) has accepted NEMA's recommendations for mandatory federal purchase of NEMA Premium motors in federal facilities.

FEMP issued federal notice of a new standard to all federal agencies on the procurement of Premium Efficient motors. The comments to the agency, jointly submitted by the American Council for an Energy Efficient Economy and NEMA, are the basis for the standard.

"Adoption of NEMA Premium by FEMP as the federal motors efficiency standard clearly signals our country's willingness to save energy and reduce greenhouse gas emissions," said Emerson Motor Company's Rob Boteler, chairman of NEMA's Motors and Generators Section Energy Management Task Force. "NEMA fully expects many industrial and commercial motors users to follow the federal example and specify only NEMA Premium motors."

The new FEMP specifications are based on the efficiency criteria set by the NEMA Premium Efficiency Motors Program. For low-voltage motors up to 200 hp, the same FEMP and NEMA Premium efficiency criteria are also used by CEE's Premium Efficiency Motors Initiative. FEMP has now extended the designation of premium-efficient motors to include medium-voltage electric motors (up to 5-kV) with rated capacities up to 500 hp.

FEMP issued federal notice of a new standard to all federal agencies on the procurement of Premium Efficient motors. The comments to the agency, jointly submitted by the American Council for an Energy Efficient Economy and NEMA, are the basis for the standard.

Specifically, EPAct 2005, section 104 requires that federal agencies procure only Energy Star-qualified products or FEMP-designated products.

This key provision requires that agencies use the premium efficiency definition consistent with the criteria for Energy Star and FEMP-designated products when specifying procurements involving energy-consuming products and systems. Such specifications must be included in all construction, renovation and service contracts that include provision of energy-consuming products and systems. They must also be used in the evaluation criteria of offers received in response to competitive solicitations.

Section 104 also requires that Energy Star products and FEMP-designated products be clearly identified and prominently displayed in any inventory or listing of products by the General Services Administration (GSA) or the Defense Logistics Agency (DLA). The act directs GSA and DLA to supply only Energy Star products or FEMP-designated products for all product categories covered by these programs, except in cases where the purchasing agency specifies in writing that:

(1) No Energy Star product or FEMP-designated product is available that would meet the buyer's functional requirements, or

(2) no such product is cost-effective.

By using the leading global specifications for NEMA Premium efficient motors, NEMA, CEE and FEMP have provided easy identification which allows federal buyers and utility company customers to select a single level of premium efficiency, thus providing a clear market signal in support of premium efficiency to manufacturers, suppliers, specifiers and installers of electric motors. "We are very pleased that our standard has once again been recognized by the federal government," said Kyle Pitsor, NEMA's vice president of government relations. "This further implementation of the Energy Policy Act of 2005 provisions is a win for the federal government, for energy efficiency advocates and for NEMA member companies."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me