Face up to the challenges, get involved in the solutions

What’s the matter with U.S. manufacturing? There’s a perception that U.S. manufacturers are fleeing to set up shop in countries where labor is cheaper, and this perception has created extensive debate throughout American industry. However, this perception is far from the reality that plagues our industries today.

01/15/2008


What’s the matter with U.S. manufacturing? There’s a perception that U.S. manufacturers are fleeing to set up shop in countries where labor is cheaper, and this perception has created extensive debate throughout American industry. However, this perception is far from the reality that plagues our industries today.

Statistics show 51% of manufacturing investments outside of the U.S. is in Europe, where the cost of labor is comparable. This is the result of increased market demands outside of the U.S. while domestic demand decreases. The harsh reality is that manufacturing investment in countries where labor is significantly cheaper, like Mexico, Singapore, China and Brazil, is less than 15%. So, it’s more an issue of survivability than greed.

Even though wages in the U.S. are significantly higher than those of many of our other nine major trade partners, it is not the driving force behind investment in foreign countries. Of our manufacturing costs, 30% are the result of government-imposed expenses, such as corporate taxes, healthcare, pensions, and regulatory compliance, many of which are the result of lobbyists who are believed to be protecting American jobs.

Corporate tax rates in the U.S. are consistently reported at 40% in contrast to countries such as the UK, France, Italy, and Germany who are already below 30%. Health care contributions for U.S. manufacturers are nearly 30% of their gross revenue, and regulatory compliance expenses are 23% higher in the U.S. at a rate of $10,000 per employee. On top of all this, U.S. manufacturers, who consume more than 25% of the nation’s power and natural gas, are experiencing an increase in energy and utilities costs to the tune of $3.7 billion.

One common definition of success is, “something that turned out as planned or intended.” U.S. manufacturers intend to stay in business; they plan to minimize the cost of manufacturing in the U.S. so they can continue to support the nation’s economy by providing employment and creating opportunities for service oriented businesses. In doing so, they must have the support and involvement of each member of the value-chain, this means you and me. So get involved in your employer’s success!

Taking the initiative

In Lean or Six Sigma efforts, people are selected from the organization to lead and participate in a focus team setting to analyze the current state, or current practices, and design a solution for implementation that improves performance in order to meet the business objectives. These focus team resources are not the only ones that need to be involved with the change process. Ultimate utilization of the solution is 100% contingent on everyone being proactively engaged.

There are five steps in changing personal behavior:

  1. Be aware of the need for change. Ask questions of your supervisor in regards to why our company is making changes to the way it’s always been done. Ask, “What’s in it for me boss?” so you will understand how the changes are going to impact, and ideally benefit you.

  2. Determine for yourself if you will support the change, If not, what must happen to create a desire to be involved, and ultimately adopt the changes being implemented. Desire for change is more than financial compensation. Try to identify how the changes will alleviate some of your day-to-day frustrations.

  3. Figure out what new skills or knowledge you will need in order to adopt and personally implement the changes being proposed. Engage those individuals in the focus teams and ask them what will be expected of you after rollout. Enquire as to what training will be provided as part of the project, or as a continuous improvement effort.

  4. Work with you peers and your leadership to create an ability to fully implement the changes in order to ensure that your personal benefits will be realized. A football team huddles before each play to ensure everyone knows what the play is, and creates an ability for any individual to clarify their role. How will you, your peers, and your leadership huddle-up on a regular basis in order to clarify the play?

  5. Find out what must you and your employer must do to reinforce the changes day-to-day. What information must be communicated from management in order to retain your support and involvement? What metrics do you want to know in order to gauge your performance or accomplishment? How will you know when the changes are fully adopted, or when your personal benefits have been realized?

    1. We can’t change many of the government policies, we can’t change the consumer demographics for our products, but we can prevent ourselves from becoming the reason why U.S. manufacturing fails to be successful. Understand the situation, get involved, and adopt the changes necessary for survival.




      Top Plant
      The Top Plant program honors outstanding manufacturing facilities in North America.
      Product of the Year
      The Product of the Year program recognizes products newly released in the manufacturing industries.
      System Integrator of the Year
      Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
      June 2018
      2018 Lubrication Guide, Motor and maintenance management, Control system migration
      May 2018
      Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
      April 2018
      2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
      June 2018
      Machine learning, produced water benefits, programming cavity pumps
      April 2018
      ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
      February 2018
      Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
      Spring 2018
      Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
      April 2018
      Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
      February 2018
      Setting internal automation standards

      Annual Salary Survey

      After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

      It's the workers—or more specifically, the lack of workers.

      The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

      Read more: 2017 Salary Survey

      The Maintenance and Reliability Coach's blog
      Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
      One Voice for Manufacturing
      The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
      The Maintenance and Reliability Professionals Blog
      The Society for Maintenance and Reliability Professionals an organization devoted...
      Machine Safety
      Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
      Research Analyst Blog
      IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
      Marshall on Maintenance
      Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
      Lachance on CMMS
      The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
      Electrical Safety Update
      This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
      Maintenance & Safety
      The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
      IIoT: Machines, Equipment, & Asset Management
      Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
      Randy Steele
      Maintenance Manager; California Oils Corp.
      Matthew J. Woo, PE, RCDD, LEED AP BD+C
      Associate, Electrical Engineering; Wood Harbinger
      Randy Oliver
      Control Systems Engineer; Robert Bosch Corp.
      Data Centers: Impacts of Climate and Cooling Technology
      This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
      Safety First: Arc Flash 101
      This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
      Critical Power: Hospital Electrical Systems
      This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
      Author Information
      Darrin Wikoff is a principal consultant at Life Cycle Engineering specializing in project management, business process re-engineering, RCM and CMMS/EAM. Contact him at dwikoff@LCE.com