External power adapter and charger market to rise 19% by 2014

The external power adapter and charger market is expected to rise 19% by 2014 because of growth in the smartphone, video game, and tablet markets.

09/11/2013


Energized by strong demand for a wide range of popular electronics products, the global market for external power adapters and chargers is expected to grow by more than $1 billion, or 19%, in just two years from 2012 to 2014, according to the report entitled “The World Market for External Power Adapters & Chargers” from IMS Research, now part of IHS Inc.

This year alone, market growth is forecast to reach almost 12%, picking up from the sluggish 5% increase seen in 2012. 

“Growth in the external power adapter market is being driven by strong end-demand for applications such as smartphones, tablets and light-emitting diode (LED) lighting,” said Jonathon Eykyn, power supply and storage component analyst for IHS. “Moreover, the launch of next-generation game consoles by Microsoft and Sony later in the year will drive further growth.” 

One area of growth will be the smartphone market, which continues to expand strongly as consumers purchase the latest models from manufacturers such as Apple and Samsung. Further demand is coming from the developing markets where 3G—and in some cases, 4G networks—are being rolled out. Such developments on the whole will spur the growth of power adapters for smartphones by 40% from 2012 to 2014, although growth projections for the longer term are much lower. 

The adoption of smartphones will also reduce the demand for other types of mobile phones, causing the market for power adapters for non-smart phones to decline by 25% during the same period. 

A second growth area lies in tablet PCs, where demand shows no signs of slowing. Apple still dominates sales, even though its market share has eroded as competing manufacturers release more products. Overall, the power adapter market for tablet PCs is calculated to grow by $250 million from 2012 to 2014, with tablets fast becoming one of the largest segments for power adapters. 

The third area of growth for power adapters is in video game consoles, set for robust expansion at the end of 2013 and throughout 2014 with the release of Microsoft’s Xbox One and Sony’s PlayStation 4. While Sony will continue to use an internal power supply in the new PlayStation like its previous generation of consoles, somewhat reducing the overall addressable market in the process, Microsoft will be using an external power supply—also like what it did in the past—which helps compensate for the loss of market from Sony’s decision. Even so, the power adapter market for wired games consoles is forecast to grow by 45% from 2012 to 2014. 

The solid growth of the market as a whole will then slow down starting next year. To prepare for what lies ahead, suppliers should identify and target the markets that will provide them with future opportunities as demand starts to slow from traditional revenue sources, IHS believes.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me