Executive survey: Manufacturing likely to lag when economy improves

Nearly 60 percent of manufacturing executives believe the economy will improve over the next six months, though they are slightly less optimistic about the prospects for the manufacturing sector.


Nearly 60 percent of manufacturing executives believe the economy will improve over the next six months, though they are slightly less optimistic about the prospects for the manufacturing sector.

Crystal ball

Those were among the key findings of a recent survey conducted KRC Research on behalf of the Baker Tilly accounting firm.The survey consisted of telephone interviews of 300 senior executives at small, medium, and large manufacturing companies during the month of June.

Cautious optimism was the prevailing sentiment when executives were asked for their opinions on the global economy, with 57 percent saying they expected improving conditions over the next six months.

Ironically, however, only 51 percent said they expect the sector in which they work-manufacturing-to improve over that time frame.

Nearly half the executives surveyed (49 percent) said they expect their own companies to suffer declines in business over the next 6 months, with 12 percent saying they felt their companies were in danger of failing.

These sentiments were most pronounced among executives at small companies (fewer than 100 employees), with 12 percent of that group fearing their companies were in imminent danger of failure.

Only 2 percent of executives at medium size companies fear immediate business failure, while 3 percent of large company executives have that fear.

Considering their feelings on the state of manufacturing, it's not surprising that 70 percent of executives said they plan to hold the line of staffing levels over the next year.

A majority of executives also plan to reduce costs of the next 12 months, with operational costs (80 percent), supplier costs (65 percent), and labor cost (51 percent) cited as the primary targets.

When it comes to making investments to boost business performance, 51 percent of executives said they are willing to spend on quality improvement systems.

In addition to their views on the economy and business in general, researcher asked for the executives' view on federal government's proposal to combat global warning through cap-and-trade legislation.

Sentiment was mixed, with 59 percent opposed to such legislation. That opposition was more strident among executives who said they were familiar with the legislation. Meanwhile, executives with a more positive outlook on the economy and the future of manufacturing were more likely to support a cap-and-trade program.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me