Ergonomics in the manufacturing plant

Kevin Reiland, the product manager for Panasonic Assembly Tool Division, addressed the audience at the 2014 Assembly Show about the importance of ergonomic assembly tools in the manufacturing plant.

10/29/2014


Kevin Reiland, the product manager for Panasonic Assembly Tool Division, addressed the audience at the 2014 Assembly Show about the importance of ergonomic assembly tools in the manufacturing plant. Courtesy: Anisa Samarxhiu, CFE MediaKevin Reiland, the product manager for Panasonic's Assembly Tool Division, addressed the audience at the 2014 Assembly Show about the importance of ergonomic assembly tools in the manufacturing plant. Ergonomics is the study of people's efficiency in their working environment and having the right tools can go a long way in reducing work-related musculoskeletal disorders (WRMD), which are the biggest work-related injuries. The most causes of WRMDs include repetitive activities and forceful exertions and common injuries include carpel tunnel, arthritis, back pain, and hernias.

Reiland said that it is better for both the plant floor worker and the employer to have more ergonomic tools available. If a worker goes injured, there are immediate negative effects that come with the medical costs of an injury, (he estimated about $28,000 for the company) but also indirect negative effects. Those effects include paying for overtime, modifying jobs, any legal problems, replacing the injured worker, training the replacement, etc. Reiland said the indirect cost on an on-site injury costs an employer over $31,000. With a potential total cost of $59,000, Reiland said that it behooves an employer to offer ergonomic tools to its workers rather than endure these potential costs.

Reiland offered ways to improve the ergonomics of tools used on the assembly floor:

  • Grip the object with your whole hand
  • Have a straight wrist when you grip the tool
  • Rotate jobs. This way there is less repetitive motion and workers also learn extra skills, making it easier to cover for an injured worker.
  • Eliminate tools that don't fit
  • Put tools on a balancer if possible

Reiland closed his presentation explaining that jobs should be adapted to the people who work them and not the other way around.

- Anisa Samarxhiu, digital project manager, CFE Media, asamarxhiu@cfemedia.com

See additional stories on the 2014 Assembly Show below.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me