EPA methane emission methods questioned

Two Republican senators urged the Environmental Protection Agency (EPA) to reconsider its methods of calculating methane emissions from natural gas operations.

12/06/2013


Two Republican senators urged the U.S. Environmental Protection Agency (EPA) to reconsider its methods of calculating methane emissions from natural gas operations.

Sens. David Vitter (R-LA) and James Inhofe (R-OK) praised a report released in September that said some parts of the gas production process actually emit less methane than EPA estimated. The study also noted the leaks from pneumatic controllers involved higher methane emissions than EPA estimates, saying they need to do more study on the subject. The comments came during a hearing of a subcommittee on oversight of the Senate Committee on Environment and Public Works on Nov. 5 in Washington, DC.

The Environmental Defense Fund and nine gas operators funded the ongoing study, which measured actual emissions from 190 wells instead of relying on computer models as does the EPA.

A report outlining first-phase results of a University of Texas study concluded the methane emissions from operations associated with gas production overall is 10% less than the EPA estimates.

University of Texas chemical engineering professor David Allen and other researchers measured methane emissions from shale gas wells completed using hydraulic fracturing. Initial study results involved only the gas extraction phase, Allen testified at the subcommittee hearing.

EPA representative Sarah Durham told Vitter and Inhofe that she could not answer their questions yet about whether the UT study would alter EPA’s estimates or change EPA methods of estimating greenhouse gases. She would only say the EPA was reviewing and evaluating the study.

Durham, director of the Office of Atmospheric Programs within the EPA’s Office of Air and Radiation, also said she could not directly answer questions about the study’s impact on future GHG emission regulations, saying she was not associated with the regulatory branch of the EPA.

Other subcommittee witnesses included Mark K. Boling, general counsel for Southwestern Energy Co., and Darren Smith, environmental manager for Devon Energy Corp.

Smith said the UT study confirmed what Devon has been telling the EPA for some time.

“Immediate action is vital because the EPA estimates have been relied upon by researchers, financial analysts, and various policy makers as a basis for critical public policy considerations,” Smith said.

“In fact, a recently finalized EPA regulation on the oil and gas sector was justified using this inaccurate data,” Smith said. “Equally troubling, a group of Northeastern states is threatening to sue the EPA if it doesn’t propose additional emissions regulations on the sector, in light of the agency’s use of flawed data. EPA must immediately revise its data to more accurately reflect emissions associated with this source category, before further harm is done.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me