EPA fracking regulations in play

Fracking rules are now coming into play to combat air pollution from natural-gas drilling, while giving companies until 2015 to meet the most stringent requirements opposed by the energy industry, U.S. Environmental Protection Agency (EPA) officials said.

05/01/2012


ISS Source, Industrial safety and security sourceFracking rules are now coming into play to combat air pollution from natural-gas drilling, while giving companies until 2015 to meet the most stringent requirements opposed by the energy industry, U.S. Environmental Protection Agency (EPA) officials said.

The regulations will primarily affect the estimated 13,000 wells a year drilled using hydraulic fracturing, or fracking, to free underground gas in shale formations. The EPA rejected a bid by the American Petroleum Institute (API) to exempt wells from the requirements altogether.

The president has been clear that he wants to continue to expand production of important domestic resources like natural gas, and today’s standard supports that goal while making sure these fuels are produced without threatening the health of the American people,” said EPA Administrator Lisa Jackson, appointed by President Barack Obama.

An EPA draft of the rule would have put the requirements into effect in about 60 days. The final regulation delays until Jan. 1, 2015, a requirement that drillers capture gases when first tapping a well. Operators must burn off that gas during the phase-in period, the EPA said.

The EPA proposed the rule last year to focus on fracking, in which millions of gallons of chemically treated water ends ups forced underground to break up rock and free gas. The method opened vast new shale gas deposits and helped push gas prices to the lowest level in a decade. Gas for May delivery touched $1.94 per million British thermal units today, the lowest intraday price since January 2002.

The rules force drillers of new wells to capture smog- forming compounds and other substances often released into the air or flared off when they tap a well. The process also results in capturing methane, the primary component of natural gas. Half the new wells already use this technology, according to the EPA.

Devon Energy Corp. has said 90 percent its wells capture the gas and Southwestern Energy Co. says almost all wells in the Marcellus and Fayetteville shale formations collect the gas already.

“Every molecule of gas you let escape out into the air is a molecule of gas you can’t sell,” said Tim Hartley, a spokesman for Oklahoma City-based Devon.

The EPA analysis says that drillers may make $11 million to $19 million a year after paying for the equipment to comply with the rule, because they can sell the gas that otherwise would escape into the air.

Lobbyists for companies including Chesapeake Energy Corp. wanted to delay and scale back the rule while rebutting environmentalists’ claims fracking causes air pollution.

“Overall, EPA has made some important adjustment in the rules that allow” the industry to comply, said Howard Feldman, research director for the American Petroleum Institute.

The group argued to the Obama administration the equipment required to capture the gas as required by the EPA rules wasn’t available in sufficient quantities. In delaying the requirement, EPA echoed that assessment.

The EPA added incentives to prod drillers to use a technology called green completions where gas ends up trapped. Companies that refracture a well and use green completions won’t be subject to state permitting requirements, according to EPA documents.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me