Energy storage tops the list of requirements for PV inverter buyers

A new survey of more than 400 global photovoltaic inverter customers has revealed a rapidly growing need for energy storage in PV systems.

04/03/2013


IMS Research (acquired by IHS, Inc.)A new survey conducted by IMS Research – now part of IHS Inc. – of more than 400 global photovoltaic (PV) inverter customers has revealed a rapidly growing need for energy storage in PV systems. Despite the infancy of the energy storage market, nearly one third of respondents indicated that they expect to be using energy storage in over 40% of the PV systems they install by 2015. The recent survey of global installers, system integrators and wholesalers also revealed that Chinese PV inverters are gaining acceptance and that the high price of microinverters is the main barrier to them gaining share.

Growing need for energy storage

When asked which requirement they saw becoming most important over the next two years, respondents from Germany, Italy, and the U.K. selected energy storage as being more critical than any other requirement for future PV inverters. When asked what the main driver for the adoption of energy storage would be, the most common response from customers was a reduction in battery prices helping to drive lower system prices and make storage financially viable.

The survey found that over 60% of respondents believed that an acceptable increase in system price for the inclusion of energy storage would be between 10 and 29%, however, almost 30% of respondents indicated they would be willing to pay an even higher premium.

“Energy storage is becoming an increasingly important feature for PV systems and if suppliers are able to deliver products in line with the industry’s expectations, the market for energy storage in PV could increase significantly over the next two years,” explained Sam Wilkinson, manager power and energy research at IHS. 

High price of microinverters restricting adoption

Price was also an important factor for respondents when considering using microinverters, and their high price was the most common reason given for not using them in their PV installations. However, the survey found that the proportion of customers using microinverters had increased by 10 percentage points in 2012 compared to 2011, with their ability to combat shading and the additional design flexibility that they offer given as the most common reasons for using them.

“As a result of the advantages and features that they offer, microinverters and power optimizers are beginning to become more widely accepted, however price is a major drawback and the majority of respondents who do not currently purchase microinverters stated they would need to reduce in price by over 50% for them to consider using them,” added Wilkinson.

Chinese products gaining acceptance

The survey also highlighted a growing acceptance for Chinese inverter products. In comparison to the survey conducted over one year ago, respondents that believe Chinese inverters are of an acceptable level of quality increased from 30 to 40%. The most notable increase came from customers located in Germany, where the proportion more than doubled. The most common concerns quoted by those that did not consider Chinese inverters to offer an acceptable level of quality were reliability of the products and the levels of service and warranty offered.

In total, over 400 purchasers of PV inverters including distributors, installers, integrators, EPCs, and wholesalers were surveyed by IHS to understand more about their requirements when choosing an inverter and a supplier. The results have been published in recently-released report, PV Inverter Customer Survey – World - 2013 which is available immediately.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me