Energy efficiency: improve your bottom line

There’s no escaping issues related to energy efficiency: global warming, carbon footprints, consumption. The buzzwords abound. A less frequently publicized, but certainly no less important issue connected to energy efficiency is your company’s bottom line. In short, energy efficiency saves you money; the bigger your facility, the more you can save.

06/15/2008


There’s no escaping issues related to energy efficiency: global warming, carbon footprints, consumption. The buzzwords abound. A less frequently publicized, but certainly no less important issue connected to energy efficiency is your company’s bottom line. In short, energy efficiency saves you money; the bigger your facility, the more you can save.

In March 2008, Johnson Controls released its second annual Energy Efficiency Indicator Survey . As in 2007, the study focused on corporate energy managers at more than 1,100 North American companies, including facility managers, CEOs, vice presidents and directors of facilities or general managers.

Overall, the study indicated that corporate energy managers are more aware of the benefits of energy efficiency improvements than they were a year ago. Approximately 60% of those interviewed expect to make energy efficiency improvements funded by capital expenditures over the next year and a similar number planned to do so using operating budgets. Over the past year, more than 40% replaced inefficient equipment before the end of its useful life, and more than 70% have invested in educating staff and other facility users as a way to increase support for increasing internal energy efficiency.

While it’s great to know what some of your peers are doing, how can you get the ball rolling at your facility? The answer is easier (and less expensive) than you think: Contact your local utility for more information on the efficiency programs they offer.

Utilities, states and other public entities throughout the United States and Canada offer efficiency programs to support corporate energy management goals %%MDASSML%% particularly at the plant level. These efficiency programs often have a mandate to deliver energy savings in their service territories, and therefore have a strong interest in helping you improve your energy efficiency. These programs can help you identify energy saving opportunities and defray the up-front cost of the efficiency improvements identified in the Johnson Controls survey, including equipment replacement and staff training.

Typically, efficiency programs support a variety of measures that can be implemented in the average plant, such as the purchase of NEMA Premium motors , variable speed drives, compact fluorescent lighting, fixtures and high-efficiency HVAC equipment. Through prescriptive programs, efficiency programs provide financial incentives in the form of rebates for the purchase of equipment that meet defined efficiency standards. Custom efficiency programs support plant assessments, feasibility studies and design assistance for new construction and renovation or expansion projects. Efficiency program staff often works with your company to perform an energy audit and establish a customized baseline of your facility’s energy use. Financial incentives for more efficient equipment or process improvements are then based on projected energy savings as compared to the baseline.

Educational programs target a range of audiences from plant managers to corporate executives. For plant managers, efficiency programs offer information and training about available products such as premium efficiency motors and energy-efficient lighting options, on-site technical assessments to identify energy savings at your plant or facility and workshops to help you connect with the vendors and installers of high-efficiency products. For corporate executives, efficiency programs provide information and resources about energy management and how it can improve the company’s bottom line. Additional opportunities are available when local utility programs team up with the U.S. Department of Energy (Industrial Technologies Program) or Environmental Protection Agency (Energy Star) on technical workshops or management seminars.

Where to look?

The Consortium for Energy Efficiency is a nonprofit organization that develops energy efficiency initiatives with its member utilities. CEE members include utilities, statewide and regional market transformation administrators, environmental groups, research organizations and state energy offices in the United States and Canada. CEE has prepared summaries of efficiency programs by sector. These summaries are easy to use, can be searched by region or utility name and are available at the CEE Website.

Whether you are looking for more information to start identifying energy efficiency opportunities at your facility, or are well on your way toward implementing improvements, check out the resources available on the CEE Website or contact your local utility. A few minutes of research can lead to huge savings for your bottom line, your carbon footprint and a host of other sustainability issues.


Author Information
Marc Hoffman is executive director of the Boston-based Consortium for Energy Efficiency. More information can be found at its Website,




Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me