Energy consumption in the U.S. has changed dramatically since 1908

Since the Chicago Cubs and Cleveland Indians last won the World Series in 1908 and 1948, respectively, energy production and consumption in the United States has changed a great deal.

11/02/2016


Chart of the amount of barrels consumed per day from 1908 to 2016. Courtesy: U.S. Energy Information AdministrationIn the 68 years since the last title for the Cleveland Indians, and the 108 years since the last World Series title for the Chicago Cubs, energy production and consumption patterns in the United States have changed a great deal. 

In 1908, the last time the Cubs won the World Series, the United States produced less than half a million barrels per day (b/d) of oil, with crude oil production having only started approximately 50 years earlier. At that time, crude oil was mainly refined to produce kerosene for use in lamps. The first Ford Model T automobile was produced in 1908, which kicked off a shift in demand in petroleum products. Instead of kerosene for lamps, it would be used to produce gasoline for automobiles.

The last time the Chicago Cubs made a World Series appearance, in 1945, the United States was producing 4.6 million b/d of crude oil. Production had been steadily increasing following the Great Depression and the end of World War II.

The last time the Cleveland Indians won the World Series, in 1948, the United States produced 5.5 million b/d of crude oil. Crude oil production had been steadily increasing since declines in the 1930s and would continue to increase until production declines in the 1970s due to the oil embargo. In 1997, the last time the Cleveland Indians appeared in the World Series, the United States produced 6.4 million b/d of oil, falling to the production levels of the 1950s.

The consumption of energy in the United States has also changed significantly over the past hundred years. In 1908, the country consumed just 15 quadrillion British thermal units (Btu), of which three-quarters was coal. By the time the Cubs made their last World Series appearance, total energy consumption in the country had doubled. Coal was still the main fuel, but petroleum had also become a large source of energy consumption.

In comparison, the last time the Indians appeared in the World Series (1997), U.S. energy consumption had increased to totals closer to those seen today. Consumption in 1997 totaled 94 quadrillion Btu. Coal’s share had fallen to one-quarter of total consumption, and natural gas and nuclear made up a large share. Since then, the shares of natural gas and other renewables used to generate electricity have increased, resulting in a lower share of coal generation.

Chart of the energy consumed by type ranging from 1908 to 2016. Courtesy: U.S. Energy Information AdministrationThe share of nonhydro renewable consumption is actually lower today (10%) than it was in 1908 (15%). This is a factor of both lower energy consumption as a whole and a large amount of biomass consumption 100 years ago. Today, while the nonhydro renewable share of total energy consumption is lower than in 1908, solar and wind generation have increased and make up a large percentage of total nonhydro renewables.

Despite the changes in fuel sources, fossil fuels have continued to make up a large percentage of U.S. energy consumption. In 1908, fossil fuels accounted for 85% of total consumption. When the Indians won the World Series in 1948, that share had increased to 91%, as petroleum and natural gas had begun to account for increasing amounts of energy consumption. Fossil fuel consumption has fallen, accounting for 81% of total consumption in 2015.

U.S. Energy Information Administration (EIA)

www.eia.gov 

- Edited from an EIA story by analysts Mason Hamilton and Mike Mobilia by CFE Media.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me