Energy a top-of-mind topic for manufacturing execs

But Johnson Controls/IFMA study finds barriers to action

05/07/2009


Energy efficiency has never been more important, according to new research commissioned by Johnson Controls . The Energy Efficiency Indicator (EEI) survey, a research report targeting professionals responsible for energy management, revealed barriers to investing in energy efficiency include: limited funding, uncertainty about future energy prices, government incentives, and energy and climate legislation.
"These findings highlight the fact that business leaders across the U.S. are increasingly aware of the need for energy efficiency and its potential to reduce operating costs while cutting greenhouse gas emissions," said C. David Myers, president of Johnson Controls Building Efficiency division. "Economic and regulatory uncertainty, however, are inhibiting organizations from investing in proactive measures," added Myers.
Johnson Controls partnered with the International Facility Management Association to commission the survey of more than 1,400 North American executives who are responsible for managing, reviewing or monitoring energy use within their organizations. The majority of respondents were chief executive officers, vice presidents, general managers or facility directors.
According to the EEI results, 71% of business leaders are paying more attention to energy efficiency than they were one year ago. Another 58% responded that energy management was extremely or very important. Of the organizations making public carbon commitments, 45% identified energy efficiency in buildings as their top carbon reduction strategy. Sustainability continues as a focus for new construction projects as 38% are seeking green building certification, while 45% plan to incorporate green elements, but not certify their facilities.
"This research recognizes the important role workplace professionals play in controlling operational costs related to energy consumption and making strategic capital investments in high-performing building technologies," said Don Young, vice president of communications, IFMA. "Indications are that as the economy recovers we will see greater investments in energy reduction and sustainable initiatives."
The study revealed a likely 10% decrease from last year in the use of facility capital budgets to fund energy efficiency projects. It also revealed a 6% decrease in the number of respondents planning to make investments using their operational budgets.
When asked about the barriers to capture potential energy savings, limited capital availability for investments (42%) and unattractive payback (21%) were cited. Nearly 50% of executives who oversee energy efficiency investments expect a payback period that is less than three years.
Market uncertainty related to carbon policy, incentives and energy prices
The EEI research indicates that business leaders believe incentives from utilities or government will drive investment. Eighty-five% stated that legislation mandating energy efficiency and/or carbon reduction is likely within the next two years. This data supports a continual upward trend, increasing from 76% in 2008.
The study found 44% of executives said that incentives are very/extremely important as they make decisions on energy efficiency, up from 38% in 2008.
There doesn't seem to be a consensus among respondents about whether energy prices will decrease or increase.
"We see a wide distribution of views about what will happen to energy prices -- ranging from a 100% increase to a 60% decrease," according to Clay Nesler, vice president of Global Energy & Sustainability at Johnson Controls. "This uncertainty appears to be another reason business leaders are holding back on investments," said Nesler.
Survey participants also were asked about on-site renewable energy technologies. Leaders stated they were considering a range of technologies, including wind, solar thermal, solar electric and geothermal sources of energy. Forty-six% reported considering solar electric - an increase of 8% over the previous year. Geothermal energy also received a substantial increase in interest level, up by seven%.
More than 1,400 leaders at the front lines of energy management and efficiency were polled through an on-line survey, conducted in April 2009. For more information about these findings, please go to www.johnsoncontrols.com .



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me