Empowering shop-floor leaders to optimize energy performance

Three of the most common energy management challenges companies face are measuring metrics, managing disparate systems and data sources, and a lack of support around energy management

10/07/2013


Today, many industrial companies are facing similar challenges around improving energy efficiency, but not all have an optimal strategy for handling them. According to the LNS Research Industrial Energy Management Survey, three of the most common energy management challenges companies are facing today are measuring metrics, managing disparate systems and data sources, and dealing with a lack of supportive company culture around energy management.

While the first two of these challenges are commonly addressed through IT solutions, often in the form of an industrial energy management (IEM) software solution implementation, the last involves leveraging the experience of what can be an overlooked company resource: Its people. Particularly, those on the shop floor with the most knowledge of site level-operations.

Drawing upon LNS survey data and follow-up conversations with several energy management leaders, it becomes evident how a more collaborative company culture around energy management and leveraging the experience of shop-floor leaders can better align corporate and local energy management goals more closely, and be a key driver for improved operational efficiency.   

Trends and data

In the past three months, more than 150 energy executives have completed the 2012-2013 LNS Research Industrial Energy Management Survey. Specifically, this survey focuses on the objectives, challenges, and benchmark data that are top-of-mind for executives and other leaders making energy management decisions. As shown in the graph below, when asked about their challenges faced in energy management, the top three responses included accurately measuring energy metrics (39% of respondents), having disparate systems and data sources (31%) and a lack of culture supporting energy management (28%).

Three of the most common energy management challenges companies face are measuring metrics, managing disparate systems and data sources, and a lack of support around energy management. Courtesy: LNS Research

It is notable that in many follow-up conversations with survey participants there were similar sentiments regarding the third challenge around culture again and again, particularly from local energy leaders. These local energy leaders can generally be characterized as long-term employees with engineering/automation backgrounds, having deep knowledge of plant operations, and having a passion for energy efficiency.

Providing insight as to why nearly 30% of survey respondents identified culture as a roadblock to optimized energy management, local energy leaders often felt a supportive culture was absent around energy. In many cases they expressed a desire to do much more at the site level, but said that a lack of executive focus on local energy management prevented them from taking further initiatives. 

Aligning site, corporate goals

Though it may come as a surprise in today’s business climate of stricter regulations, increased competition, and environmental concern, there are still many industrial companies that have yet to embrace not just an attitude of sustainable operations, but specific energy management policies.

Industrial companies may have a chief sustainability officer or an energy director at the corporate level, but these roles often lack a direct connection with leadership in operations, and rarely have a relationship with the plant level. This often occurs in moderate energy industries like food and beverage, consumer packaged goods, pharmaceuticals, and automotive. In these industries, energy use is large enough to impact product costs but typically not enough to have already been addressed purely as an operational issue.

This disconnect with plant operations is where the real missed opportunities in efficiency lie, because it fails to incorporate the shared knowledge of shop-floor leaders who have been working directly with production equipment and understand it on an intimate level. This explains the frustration expressed by these workers who, in many cases, feel they could be doing much more to improve operations from an energy management standpoint.

Companies need to increase efforts to create an environment of closer collaboration between energy management leadership and operations leadership. This shared vision of efficiency and sustainability should then be incorporated at the plant level, providing local leaders with the right tools, such as a capital budget for energy efficiency and software to provide visibility and analytics for continuous operational improvement. Armed with a specific framework in which to operate, site-level leaders are empowered to use their expertise to make the most effective improvements on the shop floor.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me