EMEA revenue growth for hazardous area equipment to halve in 2013

Revenue in 2013 for hazardous area equipment is forecast to reach €2.67 billion, growing at 5.2%, just half the rate of 2012.

04/23/2013


IHS Inc.Sales revenue this year of hazardous area equipment in the Europe-Middle East-Africa (EMEA) region will grow by less than half of what was estimated in 2012, but will then stabilize from 2014 onward, according to a recently published report from IMS Research, now part of IHS. 

Revenue in 2013 for hazardous area equipment is forecast to reach €2.67 billion, growing at 5.2%, just half the rate of 2012. Prospects for next year are predicted to improve when revenue hits €2.91 billion, representing growth of 8.9%.

By 2016, revenue will amount to €3.4 billion, equivalent to a five-year compound annual growth rate of 8.4%. In general, unit shipments are forecast to grow at a slightly higher rate reflecting overall price pressure. An exception to this growth is low-voltage motors, which are subject to increased product development and material costs as they are increasingly required to meet legislation that demands greater operating efficiency.

The market for hazardous area equipment is highly influenced by capital expenditure in the oil and gas industry, said John Morse, senior analyst for discrete automation and author of the report. “Not all orders for any specific project are issued the moment a project is awarded. Orders are scheduled throughout the build, and so have the effect of delaying and smoothing out the demand pattern.”

Morse continued: “The factors influencing the predicted decline in EMEA growth became clear from interviews conducted during research for the report. During 2011 and 2012, uncertainty of the euro, the troubled economies of some EU countries and political unrest in parts of the Middle East and North Africa, all resulted in projects being temporarily put on hold. Such factors were forecast to affect orders in 2013, when those projects would normally be in progress.”

Even so, the report concludes that the longer-term prospects for hazardous area equipment sales in EMEA look bright. The euro did not collapse in 2012 and unrest, though still present in some Middle Eastern countries, has not seriously affected world economies.

Projects delayed during the latter part of 2012 are predicted to revive during this year, generating the return to greater revenue growth from 2014 to 2016.

Source: IHS, Inc.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me