Embracing innovation at the source leads to technology breakthroughs

At the heart of National Instruments' success over its 30 years is a culture of innovation. The founders – Jeff Kodosky, Bill Nowlin and I – were young, and possibly naive. However, not knowing what couldn't be done was probably a benefit. We had a dream in the late 1970s: 'To do for engineers what the spreadsheet did for financial analysts.

03/01/2007


At the heart of National Instruments' success over its 30 years is a culture of innovation. The founders %%MDASSML%% Jeff Kodosky, Bill Nowlin and I %%MDASSML%% were young, and possibly naive. However, not knowing what couldn't be done was probably a benefit. We had a dream in the late 1970s: 'To do for engineers what the spreadsheet did for financial analysts.' The user interface of the Apple computer, the ease-of-use of the spreadsheet and the emergence of the PC platform were the inspiration for a new software tool we called LabVIEW.

We have worked hard to ingrain innovation into the NI culture to stay ahead of the changes in technology used for manufacturing. We encourage it through some simple practices. The sources of innovation can be stated very simply: things, people and concepts. Yet the challenge is fostering a culture that acts swiftly or, in the NI lingo, 'executes violently' on the right new ideas. We follow these simple concepts to stay ahead.

Things. This is a simple way of saying technology tracking is important. NI is constantly looking for components from high-volume PC, cell phone and communications industries that can be applied to the measurement and automation market. The key concept is to bridge technologies from distant industries.

Take USB for example. Typically, these mass market technologies start out being viewed as not for industrial or manufacturing applications, yet they eventually gain broad support because of their cost, ease of use and performance advantages. It's safe to say this happened for Ethernet over the last decade, and we are now seeing USB being adopted at a high rate for machine monitoring and as a mobile platform for measurements.

Another example is field-programmable gate array technology. Consumer electronics product designers have used FPGAs in a broad range of high-volume products such as digital cameras, digital television, set-top boxes, game consoles, PC screen projectors and graphics boards and GPS driver information systems. Product designers use FPGAs for many reasons, including time-to-market and performance.

These devices cost more and use more power than low-cost, application-specific integrated circuits (ASICs), but they are easier for design experts to program. At one time, FPGAs were the dominion of embedded programmer experts. Now our dream is 'to do for embedded what the PC did for the desktop.' We want to make it simpler to develop embedded control applications for the masses.

People. In the late 1800s, Henry Ford gathered best practices and ideas from unrelated industries, such as meat packing (conveyers with hooks that bring the product to the workers), Campbell Soup (continuous-flow food processing) and Singer sewing machines (machines with interchangeable parts), to 'invent' the assembly line. It's a myth, spread by marketers to enhance the Ford company reputation, that he was the lone inventor. He relied on, and sometimes hired technical experts from these leading companies to implement the vision of the assembly line.

The point is that innovation is most always a joint activity that involves understanding and tapping into visionary customers or experts. NI has a healthy 'early adopter' program for which we engage customers to understand future technology trends for automation. University professors are especially important in that their research often involves leading-edge applications that are useful in predicting future needs.

Concepts. Knowledge is the raw material for innovation. However, it is counter-intuitive that deep knowledge in a particular area can hamper or even hold back breakthrough ideas. For example, the inventors of traditional stand-alone instruments had a hard time envisioning PC-based instrumentation just as the makers of vacuum-tubes were not motivated to pursue silicon-based transistors.

Expertise in today's leading technologies may limit thinking about what the future may hold. This means that someone or a group within the organization should be focused on breadth of knowledge versus depth of knowledge to foster innovation. Don't get me wrong %%MDASSML%% you need deep technical knowledge. But for radical innovation, you need leaders who have breadth of knowledge to drive innovation within the organization.


Author Information
Dr. James Truchard is a cofounder of National Instruments and has served as CEO and president since its inception in 1976. Truchard was instrumental in pioneering virtual instrumentation, co-inventing the LabVIEW graphical development environment. He was elected to the National Academy of Engineering this year.




Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
November 2018
2018 Product of the Year finalists, mild steel welding: finding the right filler, and new technique joins aluminum to steel.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Summer 2018
Microgrids and universities, Steam traps and energy efficiency, Finding help with energy projects
October 2018
Complex upgrades for system integrators; Process control safety and compliance
November 2018
Analytics quantify processes, Fieldbus networking and IIoT, Choosing the right accelerometer

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me