Electric grid vulnerable to attack

The National Research Council and Department of Homeland Security have concluded that electric grids are vulnerable to cyberterrorism and the damage would be far more catastrophic than natural disasters like the recent Hurricane Sandy in October 2012.

12/11/2012


ISS SourceThe electric grid is vulnerable to terrorist attacks, including cyber strikes, that could cause far more damage than those associated with natural disasters such as Hurricane Sandy, a new report said.

Without urgent attention to security, the United States risks having large parts of the country blacked out “for weeks or months,” which would cost at a cost billions of dollars, the non-partisan National Research Council said.

The group’s report actually concluded in 2007 but ended up classified by its sponsor, the Department of Homeland Security (DHS), until now. The council lobbied DHS to allow for its release, and said key findings remain “highly relevant.”

While the report may have the sound of being alarmist, some of its conclusions have proven to be accurate.

“Major cascading blackouts in the U.S. Southwest in 2011, and in India in 2012, underscore the need for the measures discussed in this report,” the group said.

In the intervening five years, the potential for cyber attacks on critical elements of the electric power delivery system — including communications, sensors and controls or other key infrastructure — rose sharply.

“Any telecommunication link that is even partially outside the control of the system operators could be an insecure pathway into operations and a threat to the grid,” the report said.

The sprawling power transmission system, spread across hundreds of miles and with key facilities unguarded, is “inherently vulnerable,” the council said.

Deregulation in the mid-1990s, designed to increase competition in the supply of bulk power, has put the network even more at risk, experts have said.

“The power grid, most of which was originally designed to meet the needs of individual vertically integrated utilities, is being used to move power between regions to support the needs of competitive markets for power generation.”

As a result, parts of the bulk high-voltage system have heavy stress and are at risk for multiple failures should an attack occur.

In some instances, key equipment is “decades old” and does not have the modern technology for sensing and control that could help to limit outages, the council said.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me