Economy continues to shine, despite the looming clouds

Let's face it: The economy is a ball of fire right now. The Commerce Dept.

06/01/1998


Let's face it: The economy is a ball of fire right now. The Commerce Dept.'s "advance" report (meaning it will be revised, and is not final) on first quarter 1998 GDP showed that the economy's white-hot growth continued into the early months of this year.

The government estimates that overall GDP grew at a 4.2% annualized rate during January-March 1998, despite an absolute decline in the export of goods and services and in government spending. Even more impressive was the news about inflation -- the price index for gross domestic purchases was unchanged between the fourth quarter of last year and the first quarter of 1998. It's been more than 40 yr since we've seen such a low measure of inflation at the total economy (GDP) level.

The first quarter GDP increase was fueled by strong gains in consumer spending, home building, and capital spending for new equipment. Consumer purchases rose at a 5.7% rate during the first quarter of this year, almost twice the growth rate recorded for October-December 1997. Durable goods purchases soared to an 18.4% annualized growth rate during the first three months of this year after rising just 1.9% in the fourth quarter of 1997.

Nondurable goods purchases increased 5.2% in the first quarter, more than four times the growth trend registered over the final three months of last year. Services expenditure growth was more subdued, increasing at a moderate 3.5% rate in the first quarter of 1998 after a somewhat stronger 4.4% increase during 1997's fourth quarter.

The strong first-quarter GDP report came in above-consensus expectations. Inventory investment continued strong (a decline was widely anticipated) and the unusually sharp decline in exports simply wasn't enough to offset bullish consumer and business spending patterns.

It is now clear that, in the short term, the Asian crisis has actually been a boon for the U.S. economy. Weakness abroad has kept interest rates and energy prices low and the competition from foreign imports has restrained domestic inflation. These benefits should begin to dissipate in the months ahead, however, and the negative effects of Asia's problems should become more evident and lead to slower gains in GDP.

As a result, we expect the economy to grow at a 2.8% pace in 1998, down from a 3.8% growth rate in 1997. The primary cause of slower economic growth will be one of two things. Most likely, the Asian currency crisis, or "Asian Flu," will ultimately slow U.S. economic growth. If the Asian currency crisis does not significantly slow the U.S. economy, we still believe the growth in economic activity will ease later this year because the Federal Reserve Board will step in to slow growth by raising interest rates.

Unemployment rates are extremely low (below what the Fed believes is "full employment"). As a result, further growth in the U.S. economy puts upward pressure on wages and overall inflation as employers compete with each other for existing labor. Inflation is the Fed's nemesis, and it won't be allowed to spread its roots too far before the Fed takes pre-emptive action to stem its progression. Either way you read it, economic growth will slow as 1998 progresses.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me