Economics of energy efficiency for existing buildings

A research report and a webcast empower and encourage engineers and building owners to collaborate on energy efficiency.

05/04/2011


Engineers have long been wondering why owners would rather spend money on marble floors and gold-plated plumbing fixtures than on high-performing HVAC systems.

A research report published by Danfoss North America in October 2010 offers a few clues as to why, and a webcast hosted by Consulting-Specifying Engineer provides resources for addressing this phenomenon.

Based on one-on-one interviews of more than 50 building owners, architects, consulting engineers, contractors, and HVAC manufacturers, the research shows that owners want lowest first cost and shortest payback periods on their investments. No surprise there. But, given that many building owners are business owners or managers, why is it so hard to get them to bite on the (eventual) returns on investment?

The report states that owners perceive high performance as higher cost and higher risk. Invest in marble and it stays marble. Invest in energy efficiency, but to what end? Will the equipment work? Will staff be able to operate and maintain it? Interviewees were much less articulate about the benefits of high-performance buildings than the risks, indicating more documentation and communication of success stories and benefits needs to happen. Accordingly, education and documentation scored as highly as financial incentives for owners to invest in high-performance buildings.

Consulting-Specifying Engineer hosted a webcast on March 17, 2011, called “Economics of Energy Efficiency for Existing Buildings.” The purpose of the webcast was to create a package of educational information that addressed some of the chief findings in the study. Three presenters were:

  • Mark Hydeman, PE, FASHRAE, principal, Taylor Engineering, who provided 10 tips for saving energy in commercial HVAC and controls systems
  • Jay Enck, LEED AP, principal, CxGBS, who discussed how to make energy-efficiency fixes and upgrades persist after being installed
  • Cynthia Lucas, sales director, Engineered Tax Services, who instructed on federal energy-efficiency tax credits, utility rebates, and other financial incentives.

Hydeman’s “top 10” list of energy-saving measures encouraged engineers to specify controls and sequences of operation with greater detail, and to enforce these specifications throughout the duration of the project. He also provided detailed instruction on dynamic building control schemes, such as demand-based resets and variable flow chilled water systems.

Enck used case studies to demonstrate how the performance of efficiency fixes and upgrades will begin to drop unless engineers, owners, and operators collaborate on the development and implementation of persistence measures. Persistence measures include proper documentation and training; monitoring/trending and alarms; and giving operators authority and rewards/recognition for keeping energy performance high. 

Lucas outlined Energy Policy Act (EPAct) federal tax deductions for HVAC, lighting, and envelope improvements for existing buildings and new construction. Although the application process is intricate, tax savings can be substantial, with deductions up to $1.80/sq ft if the whole building qualifies (deductions are worth about 30% of the value of tax credits). Lucas said less than 3% of taxpayers go after the deduction and that designers of record (architects and engineers) can be eligible for the deductions stemming from public projects.

The webcast and report have practical and timely information for today’s market.

Ivanovich is the president of The Ivanovich Group LLC, which provides research, analysis, and consulting services to the buildings industry. Read his blog at theivanovichreport.wordpress.com.


Heard on the street

View the webcast on demand at www.csemag.com/webcast. It was sponsored by Lennox, ITT RCW, and UVR Resources, and is approved by AIA for 1.5 learning units (PDHs).

Danfoss North America partnered with The Ivanovich Group and Accountability Information Network to conduct the research. The report can be downloaded online.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me