Eco-excellence: New international consortium targets environmental impact of materials

08/19/2008


Granta Design announces a new collaborative project called the Environmental Materials Information Technology (EMIT) Consortium, coordinated by the U.K.’s National Physical Laboratory (NPL). The effort will target materials and process decisions that control the environmental impact of engineered products and develop information resources and software to aid members’ response to environmental regulations and to enable design for minimum environmental impact—including low carbon footprint, energy efficiency, reduced wastes and emissions, and avoidance of restricted substances.
The three-year project began July 1 with founder members Emerson Electric , Eurocopter , NASA , and Rolls-Royce . It is expected to grow to between 10 and 15 member organizations. Granta is the primary software developer for the Consortium.
Regulations such as the European Union’s REACH will have a profound effect on manufacturing organizations. Materials or processes may become obsolete or prohibitively expensive. Problems with compliance will introduce delays and cost. Other environmental objectives—e.g., low carbon footprint or design for end-of-life—are becoming more important due to consumer demand and government action, such as carbon trading schemes.
By far the best response is to build consideration of these factors into the design process, where modifications to products cost least and have the greatest impact. Choices of material and of manufacturing process are of central importance since these determine the use of restricted substances and can have a major influence on energy usage and emissions over a product’s lifetime. Requirements for such choices include:
• Accurate information on restricted substances and on “eco properties” such as the carbon dioxide generated in producing a raw material;
• Specialist analysis capabilities—for example, to estimate the carbon dioxide that a potential product will generate at each stage in its life cycle based on the materials and processes it uses; and
• Well-managed corporate materials information integrated with the organization’s wider business and engineering systems—for example, to enable all materials in a company’s products to be identified and the impact of materials substitutions to be assessed.
Today most manufacturing enterprises have none of these elements in place. Excellence in eco design demands integrated and easy access to all of them. For the EMIT Consortium, the starting point will be proven technology developed at Granta and the University of Cambridge in each of these key areas: eco property data, eco analysis software, and materials information management.
Consortium members will implement and apply this technology in their design processes, and guide its further development and integration. The model for the project is the successful Material Data Management Consortium , which has brought together leaders in aerospace, defense, and energy to develop best practice approaches and software to manage mission-critical materials data. The MDMC is now in its sixth year, with 17 active member organizations.
According to Professor David Cebon, managing director for Granta, "The caliber of the initial members and the broad interest that we have experienced across industry sectors demonstrates its importance. These issues are vital, whether you are an aerospace organization seeking to avoid use of materials that may become obsolete in future, or an appliance manufacturer aiming to reduce the environmental impact of products without increasing cost."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me