EC: Smart-Encoder

Machine and embedded control – Discrete sensors: The Smart-Encoder is a new line of rotary encoders from AVG Automation’s Autotech Technologies division that are field programmable through a built-in LED display and two push-buttons, allowing for programming and adaptation to a wide variety of applications without the need for a computer, cable, or software. This is a Control Engineering 2012 Engineers’ Choice finalist.

11/17/2011


Smart-Encoder. The Smart-Encoder is a new line of rotary encoders that are field programmable through a built-in LED display and two push-buttons, allowing for programming and adaptation to a wide variety of applications without the need for a computer, cable, or software. This is a Control Engineering 2012 Engineers’ Choice finalist.AVG Automation’s Autotech Technologies division has released the new Smart-Encoder line, which represents a paradigm shift in rotary encoders. A manufacturing plant with a wide variety of machinery may have more than a dozen different types of rotary encoders. Since an encoder is an electromechanical device with limited life, it is typically a high-maintenance part needing many replacements. The new all-in-one Smart-Encoder’s novel features allow it to be programmed and adapted to an application right on the machine, without the need for a computer, cable, or software—reducing downtime and express orders for new encoders.

The Smart-Encoder’s built-in LED display allows the user to check on its operation on the spot as it shows both counts and RPM. In addition, through a simple two-button interface, the Smart-Encoder can be configured as an incremental or absolute encoder with either Binary, BCD or Gray code formats. Quadrature incremental is programmable up to 1,024 counts per revolution, and the Absolute model can be programmed up to 4,096 counts per rev. Smart-Encoder is available in the industry standard 2.5-in. industrial housing or a 4.0-in. heavy-duty housing. Both have NEMA 4/4X ratings and are available in explosion-proof and submersible models. Additionally, the encoders are designed to be direct drop-in replacements for other major brands. Made in America, Autotech Technologies’ Smart-Encoder line of products brings a new, intuitive approach to encoders that can eliminate the need to maintain inventory of many different kinds of encoders, while remaining cost-competitive.     

www.autotechcontrols.net

www.autotechcontrols.net/enc/smart-encoder.htm

Autotech Controls LP

Return to the list of the 2012 Engineers' Choice finalists.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me