Driving the point across: Break-fix isn't a strategy

My car provides basic transportation, which is all I really ask of it. It is pleasant enough to drive. It gets reasonably good gas mileage. It has needed minimal major repairs. It has had very little unscheduled downtime – that accident a few years back being the prime culprit. I have managed to successfully coax my car through six Chicago winters.

08/15/2008


My car provides basic transportation, which is all I really ask of it. It is pleasant enough to drive. It gets reasonably good gas mileage. It has needed minimal major repairs. It has had very little unscheduled downtime %%MDASSML%% that accident a few years back being the prime culprit.

I have managed to successfully coax my car through six Chicago winters. Now that it's August, the decision faces me again %%MDASSML%% do I dip into my capital improvement budget for a newer model, or perform the scheduled maintenance needed to secure another year of service?

In the interim, though, I have to keep changing the oil and keeping the car running well. Running the car into the ground isn't an option.

It shouldn't be an option on the plant floor, either, but that message is slow in getting out. Plant Engineering participated in a study with the Aberdeen Group, as readers discussed how Enterprise Asset Management can maximize the return on equipment. Some of the basic findings:

  • Best-in-class manufacturers are 50% more likely to standardize asset management and reliability processes across the enterprise

  • Best-in-class manufacturers are three times more likely to focus on condition- and Reliability-Centered Maintenance by establishing continuous improvement teams.

    • One of the key recommendations from the Aberdeen Group/Plant Engineering study was this one %%MDASSML%% and don't stop me even if you've heard this before: “Move from a break-fix maintenance approach to a more predictive approach by adopting advanced capabilities such as RCM.”

      Costs in every manufacturing facility are on the rise from factors we cannot easily control %%MDASSML%% from regulatory requirements to the price of oil on the open market. Why are we so reluctant to deal with the costs we can control?

      Maintenance isn't easy. It takes a plan. It takes commitment. It takes a clear understanding of the costs and benefits %%MDASSML%% even if some of the costs involve taking one of your production lines off-line for two hours to ensure that it runs smoothly the rest of the time. Some managers measure only the cost of those two hours of downtime. Best-in-class managers, as the study shows, know better. They know when something breaks beyond repair, it will cost far more than those two hours to put things right again.

      Smart manufacturers already get one more season out of their equipment through a solid maintenance program. They do it season after season. They've started long before it became a business imperative. They know that break-fix isn't a strategy, as much as it is a plan for disaster.

      They probably take good care of their cars, too.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me